Review of Dexter Axle Trailer Bearings Races Seals Caps - Caps - 21-41-1 Video

I'm guessing you have a tandem axle trailer, is that correct? If the 7K figure you mentioned represents the trailer's GVWR (maximum loaded weight to include the weight of the empty trailer plus whatever's loaded on it),…

There isn't a kit available, but I was able to find each of the components you need, which are available individually. Obviously, you will need bearing #LM67048 and matching race #LM67010, along with bearing #L44649 and matching race #L44610.…

The weight capacity of a trailer will always be limited by its weakest component. You can in turn increase the weight capacity of the trailer by upgrading these components. Based on what you provided, the tires rated at 3,420 lbs for the pair are…

Trailer wheel lug nuts that are 1/2-inch inside diameter typically have a 20-TPI thread pitch (20 threads per inch). Most lug nuts also use a 60-degree-coned profile like #CE11051, but a 90-degree like #STN569 is also available for 9/16-inch studs.…

We do have a Kenda Karrier trailer wheel and tire in the size you need of ST205/75-15 with the part #AM32418DX which is mounted on a silver wheel like you mentioned.

I confirmed with my contact at Dexter Axle that the grease zerk used in their EZ Lube spindles like #TRU74FR is a standard 1/4-inch pipe thread fitting that you can replace with an item like #Gzerk. Your local hardware store may have one too. You…

Yes just the light assemblies are available for the Trailer Taillight kit part #V944 that you referenced. For that you'd want the part #M844L for the left hand side and part #M844 for the right hand side.

The Kat's Heaters Handi-Heat Magnetic Heater #KH1155 was specifically designed to heat up various fluids in the engine of your vehicle. Since it has a heat output of 300 F - 400 F I recommend going another route. A better way to go is with the…

Both ThermaHeat RV Pads #277-000161 and #277-000162 that you referenced are designed for 12V systems so they will work if you're just using the house battery bank on your rig. Since the optimal voltage from a 12V system is around the 13.5 mark…

The seal for your Dexter 4,400 lb axle is part #58846 which we also have in a pack of 2 listed as part #RG06-050 these have an inner diameter of 1.719" and an outer diameter of 2.565".

The TruRyde double lip grease seal set you referenced, part #RG06-050, is indeed the correct grease seal for use on a number 84 spindle with inner bearing #L68149 and outer bearing #L44649. The reference numbers you gave are the seal part numbers…

For a Dexter 5,200 lb axle the correct grease seal is the part #GS-2250DL that you referenced which has an inner diameter of 2.25 inch and an outer diameter of 3.376 inch.