Review of Dexter Axle Trailer Axles - Leaf Spring Suspension - 8327830-EB Video

Welding a mounting flange, possible item #4-35, is a very precise installation. The flanges need to be installed square and concentric to the hub and drum assembly and each other. If the flange is installed incorrectly rapid brake lining wear,…

In some situations, brakes can be installed on only one axle of a tandem axle trailer, however you should first check your state laws to see how many brakes are required for the gross vehicle weight rating (GVWR) of your tandem axle trailer. Some…

The complete wet bolt and shackle strap replacement kit I recommend for your application is the MORryde Suspension Upgrade Kit for Tandem Axle Trailers #MR46ZR because it includes the wet bolts with the grease fittings as well as 1/2" thick…

The best matching leaf springs we offer for a 4,400 lb axle is going to be the #e27SR which is for 4,500 lb axles and has the very common spring length of 26 inches.

As long as your trailer meets the specifications of the Timbren Silent Ride Suspension #TSR10KT02 than you can most certainly use it on your trailer! Timbren Silent Ride Suspension work with tandem axle trailers that have 3" round axles and do…

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

The Demco #DM15349-52 does not include mounting hardware. Demco recommends using grade 5 bolts, and the holes in the coupler are 5/8 inches in diameter. If you click the provided link, you can see a product demonstration video featuring the…

I spoke to Demco, and unfortunately the Coupler #DM15349-52 cannot be mounted to the bottom of a frame. They went on to say that there would not be enough surface area for it to handle the weight when welded or bolted on. That being said, the Ram…

Safety chains are required by law in many different places, and in order to find out about the specific regulations you will need to contact your local DMV. I will say that no matter what the law may be, safety chains are a very good idea, no matter…

I can't speak of the grade of material the locks would be made from relative to the hooks on the 48" Long Safety Chain, #TCTSCG30-748-04x2 that have been quality tested and approved for this application. Safety chains or cables are required…

Thank you for providing a photo of your trailer shackle straps showing the extra non-threaded portion of the Redline zerk-fitted bolts #126B2. Shackle bolts are intended to have a fairly loose fit with the shackle straps when installed properly. This…

The 48" Long Safety Chain with 7/16" S-Hook #TCTSCG30-748-04x2 will accept a 3/8" bolt through the opening of the chain link. You will need to ensure the bolt you use has a shear strength which is higher than the 5,000lb weight…