Determining Correct Replacement Equalizers and Shackle Straps for Older Trailer
Question:
How do I determine what replacement parts I need e.g. dimensions? I purchased an older trailer and everything is pretty rusty and loose. Trailer appears to be a copycat home built unit with no visible vin or model number. Axles are 8 lug with brakes so I assume 7000lbs axles tandem. I am looking to purchase Shackles, bolts, equalizers, and bushings. Thank you
asked by: Robert H
Helpful Expert Reply:
The easiest way to determine the correct replacement parts for your trailer's suspension is by simply measuring its existing components.
Looking at one of your current equalizers, you will want to measure from the center of the front hole to the center of the rear hole. Then measure from the center of the top hole down to the center line between the two lower holes. One of the more popular sized equalizers is a 7-3/4 inch long unit like # TREQE1. I have attached an image with the dimensions labeled on this size so you can see exactly what you will want to measure.
You can then just take some quick measurements on your current shackle straps to ensure you get matching replacements.
I have attached a link that will take you directly to our selection of suspension components that you can look through. I have also attached an installation video that you might find helpful.
Product Page this Question was Asked From
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
- Trailer Leaf Spring Suspension
- Standard Equalizer
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 7-3/4 Inch Long
- Tandem Axle
- Triple Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Equalizer Upgrade Recommendation for Tandem 3,500 lb Dexter Axles
- Shop: Dexter Bronze Bushings - Qty 4
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Article: Double-Eye Trailer Suspension System Review
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Suspension Enhancement
- Article: How to Raise Your Travel Trailer Height
- Video: Review of Lippert Replacement LED Light Strip Solera RV Awning - LC423331
- Article: Most Popular Wheel Bearings
- Article: Overview of Lubricating Grease
- Search Results: sp~220275
- Search Results: sp~212275
- Search Results: sp~218275
- Search Results: sp~198275
- Search Results: sp~111275
- Q&A: How to Decide Which Tandem Axle Trailer Hanger Kit to Use
- Q&A: Will MORryde X-Factor Crossmember Adapter Kit for Drop Down Allow Avoiding Drain Line
- Q&A: Why Would Trailer Axle Shackles Flip Wrong Direction When Trailer is Unloaded
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR76ZR
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearings - L44649
- Video: TruRyde Curved Equalizer Installation
- Search Results: equalizers
- Search Results: equalizer
on Trailer Leaf Spring Suspension
