Curt Hitch Ball - Gooseneck Hitch Ball - C60601 Review Video

You're doing all of the correct things. Unfortunately when a gooseneck hitch ball hasn't been removed for a longer period of time and/or had lubricant applied it can seize up in the receiver which it sounds like is what happened to…

Since you have a Demco Recon for the recessed ball you could use the Demco Recon Base part #DM6201 that you mentioned to replace the base and attach it to the gooseneck ball of your 2023 GMC Sierra 3500.

Yes, a 235/85 R16 tire is designed to fit a trailer wheel with a 6" or 6-1/2" wide wheel. For a premium 235/85 R16 tire option, I recommend using the Westlake ST235/85R16 Radial Trailer Tire part #LHWL410 as all Westlake brand tires…

I can help set your mind at ease about the Curt Ball #C60601. To help you understand why the ball is able to spin I want to tell you what's going on inside the hitch. The way the ball sits in and secures to the underbed system without a pin…

The Reese Replacement Ball part #RP19311 is the correct gooseneck ball for your 2017 Ford F-350 that has the factory rail kit. This will install right into the gooseneck hitch opening you have and you'd be set. I attached an install video…

Your Curt Pop-In Ball for Factory Ford and Ram Underbed Gooseneck Hitches - 2-5/16" Diameter Ball #C60601 lifts the pin when that lever is lifted. Because that lever is broken off you will need to lift that pin and turn it 90 degrees to release…

If you get the Out of Stroke error message on the Lippert Ground Control system, such as #LC358590, then that indicates that the jack has extended as far as it will go and cannot go any further. To clear the error you can extend all of the jacks in…

The "Out of Stroke" error on the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System - 4-Point Set #LC358590 and 6-Point Set #LC675817 means that they have reached the max height, can no longer lift so you need to relocate your…

Pressing the left and right buttons together will activate the middle jacks on the Ground Control 3.0 #LC675817 which is how you'll need to lower them so that you can raise them up and clear the out of stroke error code. Try that and let me know…

To add a gooseneck ball and safety chain holders to your Ram factory puck system, you will want the Curt Ball and Safety Chain Loop Kit for Ram Underbed Gooseneck Hitch item #C58CR. This kit works with the factory-installed gooseneck hitches on Dodge…

The Curt OEM Ball Bearing Gooseneck Balls like the #C630-652 you have are notorious for being difficult to remove. This is is due to the small lever on the top that doesn't really give you enough leverage to fully open the handle easily. To…

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…