Gooseneck Hitch Ball Recommendation for 2017 Ford F-350 with Factory Rail Kit

Question

Question:

Need ball for factory 5th wheel Ford f350 2017. Please advise

asked by: Christian S

0

Expert Reply:

The Reese Replacement Ball part # RP19311 is the correct gooseneck ball for your 2017 Ford F-350 that has the factory rail kit. This will install right into the gooseneck hitch opening you have and you'd be set.

I attached an install video for this ball for you to check out as well.

expert reply by: Jameson C

0

Answer 1

The Curt Pop-In Ball, part #C60629, has a shank with a diameter of 2-1/4 inches and is 3 inches long. It's designed specifically to fit the factory gooseneck hitches that are an option with newer model Fords, GMs, and Nissans. If this is what…

view full answer...

Answer 2

I found a gooseneck ball kit that will fit your 2017 Ford F-350. I recommend the Reese Elite Pop-In Ball Kit, #RP30137, for your Ford. The Reese kite will also include the safety chain loops and the 2-5/16 ball, but the Reese ball includes an…

view full answer...

Answer 3

You're correct that the B&W Ball and Safety Chain Kit #BWGNXA2061 for your 2022 Ford F-350 Super Duty will sit too high to accommodate the Blue Ox Gooseneck-to-5th-Wheel Trailer Hitch Adapter #BLU52XR. To use the Blue Ox hitch with…

view full answer...

Answer 4

Curt Pop-In Ball #C60601 is designed specifically for 2011 to 2018 Ford trucks with the factory installed gooseneck prep package or 2013 to 2018 Ram trucks with the factory installed gooseneck prep package. If the truck you bought is not one of those…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 12

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Gooseneck Hitch Ball Recommendation for 2017 Ford F-350 with Factory Rail Kit

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching