Trailer Hitch and Towing Equipment Recommendation for 2012 Land Rover Ranger Rover Sport HSE
Question:
I need a complete tow package for my 2012 range rover hse. Tow bar, hitchand electric
asked by: Tim W
Expert Reply:
For a trailer hitch, I'd recommend the Curt Class III, part # 13456. The # C13128 hitch you'd looked at is for the Land Rover Evoque, and wouldn't fit your Range Rover Sport. Please note, if your Range Rover Sport has the full-sized spare tire, it will no longer fit under the vehicle once the hitch is installed.
For a trailer wiring harness, I'd recommend the # C59496. For a ball mount, use # C45030 and # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball. You will also need a pin and clip # PC3.
I've linked to an install video for the hitch and to a typical install video for the wiring harness I recommended.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 800 lbs WD TW
- Visible Cross Tube
- CURT
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 8 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Q&A: How Does Brake Controller Install 2020 Chevy Equinox with Tow Package
- Q&A: Trailer Hitch for a 2018 Hyundai Elantra GT
- Q&A: Installing The Redarc Trailer Brake Controller # RED44FR On A 2020 Ford Ranger
- Q&A: Best Trailer Wiring Harness for a 2018 Land Rover Evoque HSE Dynamic
- Q&A: Towing a Trailer with Electric Brakes with a Semi Tractor with Air Brakes
- Q&A: Tire and Wheel Size to Replace 18.5x8.5-8 on Trailer
- Q&A: Replacement Inner Member Assembly for UFP A 60 Surge Brake Coupler
- Article: How to Use a Roof Rack (Like a Boss)
- Article: How to Charge RV Batteries