CargoSmart E Track - E-Track - 3481770 Review Video

You can pretty easily go from a 205/75-14 to a 15 inch tire size like 205/75-15 like with the #AM32395 without clearance issues. This will give you a slightly larger wheel and tire which will have a higher weight capacity. So you might gain a…

You will use metal screws to install the etrailer Horizontal E-Track #e42VR. You'll also need backing plates to install this e-track and the mounting hardware is actually included with the etrailer E-Track Backing Plates with Hardware #e76YR.…

I do have a solution for you, but I think welding something to the floor is going to really limit where you can place things to have them tied down. I don't think you're going to be able to get away from the issue with galvanic corrosion…

The etrailer e-track system #e42VR will work great in your aluminum utility trailer, but you will want to put a layer between the E-Track and the aluminum of your trailer. This layer will help prevent corrosion cause by contact of dissimilar metals.…

Tow Rax states that the capacity for the Tow-Rax Low-Profile Floor Track #TWSP72TA is based on the attachments that are used in it. So in your case you'd just be limited by the capacity of the anchors you installed in the track. The amount of…

Stainless steel hardware would be the best type to use when installing the Tow-Rax Low-Profile Floor Track for Tie-Down Anchors #TWSP72TA to prevent corrosion.

The Tow-Rax system is compatible with the Erickson O-Track System and vice versa. The weight capacities/restrictions are based on the attachments themselves, so those individual capacities are what you will want to pay attention to when interchanging…

Powder coating and galvanization are both about the same in terms of rust resistance. If you like the black of the part #e42VR it would work just as well as a galvanized version #e62VR.

I reached out to my contact at Tow-Rax who confirmed that you can use the Tow-Rax Low-Profile Floor Track #TWSP72TA to install a winch mounting bracket on. The tracks will hold up just fine but you will want to make sure that your mounting hardware…

Yes, you certainly can install E-track with one in front and one in back of the tires. It makes sense to position the track that way, since the ATV may be on one side or the other. E-track is so versatile there are a lot of different ways you could…

Replacement Battery Box for Curt Soft Trac I Trailer Breakaway Kits - Side Load #C52027 has outside dimensions of 5" long x 3-3/4" wide x 3-3/8" tall and will fit the UB1250 style battery we carry which has dimensions of 3-1/2"…

Aluminum trailer frames or bodies can cause grounding issues so I suggest using a separate ground wire that runs from the rear of the trailer up to the main ground post in the junction box like #38656. You can join the ground wires for the individual…