Blue Ox Tow Bars BX88208 Review Video

The charge lines connect to the 12V pin on both the 7-way of your motorhome (1 o'clock position) and the 6-way (center pin). The wiring pigtail will ensure the connection between these pins so your motorhome will provide a maintenance charge to…

Yes, if you were to use anything other than a magnetic light kit on your 2017 Jeep Wrangler Unlimited you will need to use the brake light relay #RM-88400. The relay is meant to prevent the Jeep's brake signal for overriding the turn signal…

Yes it will! The links on the Blue Ox 3' Safety Cables #BX88208 are 1/2 inch diameter and will clip on to the safety chains that come with the Blue Ox Avail Tow Bar #BX7420. I have added links to video reviews for you to check out as well.

I have a solution for you, however, I would not recommend mounting a tow bar directly to a bumper on a Jeep, whether it is OEM or an aftermarket bumper. Jeep does not recommend towing the Wrangler with the OEM bumper because it was not designed to…

In order to flat-tow your 2013 Jeep Rubicon 10th Anniversary Edition on your Forest River 2250LE, you need a base plate, a tow bar, a tow braking system, safety cables, and vehicle tow wiring. I recommend the following setup: - Blue Ox Base Plate Kit…

We've been told that the battery life of the Hopkins wireless magnetic tow lights, #C6304 should be right at 2 hours. But if you use lithium batteries you should easy get double that!

To flat tow the 2020 Jeep Wrangler I recommend the Roadmaster Diode 7-Wire to 6-Wire Wiring Kit part #RM-15267 because of it's nice clean install. The Roadmaster kit will give you a 6-way round at the front of the Jeep with a coiled cord to…

I consulted an online copy of the 2013 Jeep Wrangler Unlimited Owner's Manual, and found that the information regarding flat towing procedures begins on page number 532. The procedures outlined make no mention of what position the key needs to be…

The difference between the #RM-4700 and the #RM-4750 is being able to use them with your base plates. If you have the crossbar on your base plates you will need part #RM-4700. The RM-4750 is not compatible with other style base plates.

Yes, if the supplemental braking system uses the brake pedal to apply your 2015 Jeep Wrangle's brakes, then you will need to wire in the Roadmaster Brake Relay, #RM-88400. The relay will keep your Jeep's brake light signal from overriding the…

Best option we have for charging a vehicle battery while being flat towed is the is the Roadmaster Battery Charge Line part #RM-156-25 which is specifically designed for this. Otherwise you can use a 6 or 7-way connector and wiring to give you the…

Based on the information that I have you will not need to use a brake light relay on your 2014 Jeep Wrangler Rubicon when flat towing it and using a supplemental braking system. Since you will need to disconnect the battery on your vehicle you…