Blue Ox Base Plate Kit Installation - 2013 Jeep Wrangler Video

The Blue Ox Base Plate Kit part #BX1126 that you referenced is the correct fit for your 2013 Jeep Wrangler and also is compatible with the Blue Ox Alexxa tow bar that you have as well. You would not need to take any measurements either.

The charge lines connect to the 12V pin on both the 7-way of your motorhome (1 o'clock position) and the 6-way (center pin). The wiring pigtail will ensure the connection between these pins so your motorhome will provide a maintenance charge to…

We've been told that the battery life of the Hopkins wireless magnetic tow lights, #C6304 should be right at 2 hours. But if you use lithium batteries you should easy get double that!

I have a solution for you, however, I would not recommend mounting a tow bar directly to a bumper on a Jeep, whether it is OEM or an aftermarket bumper. Jeep does not recommend towing the Wrangler with the OEM bumper because it was not designed to…

Yes it will! The links on the Blue Ox 3' Safety Cables #BX88208 are 1/2 inch diameter and will clip on to the safety chains that come with the Blue Ox Avail Tow Bar #BX7420. I have added links to video reviews for you to check out as well.

In order to flat-tow your 2013 Jeep Rubicon 10th Anniversary Edition on your Forest River 2250LE, you need a base plate, a tow bar, a tow braking system, safety cables, and vehicle tow wiring. I recommend the following setup: - Blue Ox Base Plate Kit…

To flat tow the 2020 Jeep Wrangler I recommend the Roadmaster Diode 7-Wire to 6-Wire Wiring Kit part #RM-15267 because of it's nice clean install. The Roadmaster kit will give you a 6-way round at the front of the Jeep with a coiled cord to…

I consulted an online copy of the 2013 Jeep Wrangler Unlimited Owner's Manual, and found that the information regarding flat towing procedures begins on page number 532. The procedures outlined make no mention of what position the key needs to be…

Best option we have for charging a vehicle battery while being flat towed is the is the Roadmaster Battery Charge Line part #RM-156-25 which is specifically designed for this. Otherwise you can use a 6 or 7-way connector and wiring to give you the…

The wire of the Roadmaster battery charge line kit part #RM-156-25 that you referenced was designed to wire to the 12 volt accessory circuit of the trailer wiring. So yes, the pin in the 1:00 position. On a 6-way the center pin is the charge line so…

Yes, if the supplemental braking system uses the brake pedal to apply your 2015 Jeep Wrangle's brakes, then you will need to wire in the Roadmaster Brake Relay, #RM-88400. The relay will keep your Jeep's brake light signal from overriding the…

To connect the Roadmaster Battery Charge Line Kit for Towed Vehicles #RM-156-25 to your tow vehicle, you're going first want to mount the included circuit breaker with the included self tapping screws. Next, you're going to want to strip the…