Customers compare BWRVK2401 to these similar products
Products Featured in this Video
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
This is a great question. The B&W OEM Companion #BWRVK3715 and the Curt A25 #C24FR for the factory pucks on your 2020 GMC Sierra 3500 (congrats on the new truck, by the way!) represent the very peak of fixed 5th wheel hitches on the market.…
view full answer...The R and the D in a trailer tire size stand for radial and bias-ply. A radial tire flexes more than a bias tire, giving it better ground contact, traction, stability, and tread wear. A radial tire will normally run cooler than a bias ply tire,…
view full answer...The B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches #BWRVK2401 is a confirmed fit for your 2015 Ford F-250 with 6-3/4 foot bed. It will fit with your air spring currently on your truck. I've attached a customer photo…
view full answer...If your bed liner is the spray-in type, you can simply install the fifth wheel hitch rails directly on top of it. However, if your bed liner is the hard plastic drop-in type, the liner would need to be trimmed away so that the bed rails have direct…
view full answer...The B&W Universal Base Rails Install Kit for 10 Bolt 5th Wheel Hitches is compatible only with 8 foot bed 2002 Ford F-250 Super Duty.
view full answer...We recommend having at least 6 inches of clearance between the overhang of a 5th Wheel trailer and the top of the truck's bed rails. Maintaining this space can be a bit harder with a lifted truck but there are certainly ways to try and adjust for…
view full answer...When installing the B&W Custom Base Rails and Installation Kit #BWRVK2401 on your 2011 Ford F-250, you will want to have the following items on hand: Impact wrench or ratchet with 15/16 inch and 3/4 inch sockets 15/16 inch and 3/4 inch box end…
view full answer...For your 2016 Ford F-250 short bed without the factory rails, I recommend you get the B&W Custom Base Rails and Installation Kit for 5th Wheel Trailer Hitches #BWRVK2401 to use with the B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw…
view full answer...You can definitely connect a 5th wheel wiring harness to the bumper 7-way on your truck. The second in-bed 7-way connection is simply to give an easy access point and clean look. It keeps the wiring from dragging or moving against your tailgate, so…
view full answer...The Andersen Ultimate Fifth Wheel Connection Adapter part #AM3200 that you referenced has 9 inches of offset built into it. What that means is that ball that connects to the trailer's pin box is moved back 9 inches from the center line between…
view full answer...There are certain states that will require safety chains to be used with the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter part #AM3200 such as California but not every states does so you will need to check with local…
view full answer...In general you'll want the shorter side of the Andersen Ultimate Connection #AM3200 towards the rear of the truck bed if you have a short bed truck or towards the front of the truck if you have a long bed truck. That's typically how the two…
view full answer...