Customers compare BPH64FR to these similar products
Products Featured in this Video
What's up, everybody. It's A.J. with etrailer.com. Today, we're gonna be checking out this BulletProof hitch ball mount. So it's gonna have a 2 5/16 ball on there and a two inch ball, easily just flip around for whichever one you need. Let's check it out.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
This is a reason we measure and label our site all the same way rather than going off the description or title from our manufacturers. On the BulletProof Hitches 2-Ball Mount #BPH64FR it is capable of a 4" total drop or 4" total rise. The…
view full answer...The total height of the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise item #BWTS10033B is 6 1/2". I have attached a picture with the dimensions drawn on it.
view full answer...The total height of the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise #BWTS10037B in the rise position is 9-1/2 inches from the center of the shank's pinhole to the top of the ball (in the highest position).…
view full answer...The B&W Tow and Stow ball mount #BWTS10049B will have some great features. You can stow the mounting platform that has the 3 hitch balls (1-7/8, 2, and 2-5/16 inch) underneath your vehicle. This is nice because you will eliminate the possibility…
view full answer...From the top of the shank to the bottom of the vertical section of the B&W Tow & Stow 2-Ball Mount #BWTS10040B measures 10". Then with the 2" hitch ball in the lowest position the 2-5/16" hitch ball will sit about 12"…
view full answer...The B&W Tow & Stow 2-Ball Mount #BWTS10037B that you referenced will hang down exactly 5-1/2 inches from the bottom of your hitch opening.
view full answer...Yes, you can set the B&W Tow and Stow Ball Mount part #BWTS10033B to 0 rise if you align the adjustable portion of the ball mount with the shank in the drop position. There is not an offset in drop position it starts at 0 and the increments…
view full answer...The B&W Tow & Stow 2-Ball Mount part #BWTS10037B will measure 9.5" from the top of the shank to the bottom of the hitch ball while in the lowest settings.
view full answer...There isn't a specific distance you want to have between the bumper of a vehicle and the hitch ball, but in general you'll want more than an inch. This will give you additional leeway when hitching up the trailer so that you don't slam…
view full answer...When we installed Curt trailer hitch #C13146 on a 2014 Acura MDX the face of the hitch receiver has almost flush with the back of the bumper, see photo. It stuck out maybe 1/2 an inch. This should keep your shins bruise-free. I have bumped into…
view full answer...To lock the Blue Ox Adjustable 2-Ball Mount #BLU75XR to your trailer hitch and the ball mount to the shank section I recommend picking up the Curt Lock Set #C23556. This includes a standard locking hitch pin as well as one that's a bit longer.…
view full answer...The 2-Tang Clevis for BulletProof Hitches Adjustable Ball Mount #358CLEVIS has a spread of 2-1/2" between the tangs. You would also need the BulletProof Hitches Adjustable 2-Ball Mount for 2" Hitch #BPH64FR. The combination of this clevis…
view full answer...