Troubleshooting a Curt Wiring Harness on a 2012 Dodge Grand Caravan that Keeps Blowing Fuses
Question:
I have the Curt C56331 installed on my Dodge Grand Caravan 2012. All works good when testing the harness. For some reasons that I ignore, the fuse will eventually blow, even when not connected to a trailer. The fuse won’t blow instantly but will eventually blow. After changing the fuse, all works again and then blows again even when the harness is not used. I wonder if the power converter box is defect and draw too much power. Any possible answer on that? Thanks!
asked by: Yves A
Expert Reply:
Something is going on with the installation of the Curt Wiring Harness part # C56331 on your 2012 Dodge Grand Caravan. It should not be blowing the fuse under normal towing situations, but even more so without a trailer being connected. What I would recommend you do is go over all of the connections this harness makes to your vehicle to see if there is anything out of place that could be causing a short.
Also, check that there aren't any cut or exposed sections of the power wire between the fuse and converter box that would cause the wire to overdraw and blow the fuse.
I attached an FAQ article on troubleshooting 4-way installs for you to check out as well.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2014 Chrysler Town and Country
- Video: Trailer Wiring Harness Installation - 2017 Dodge Grand Caravan 118534
- Q&A: Running Lights Not Working on Trailer Being Towed by a 2016 Dodge Grand Caravan
- Search Results: 4 pin flat connector
- Search Results: plug cover
- Search Results: fuse
- Search Results: inline fuse holder
- Search Results: 16 ga wire
- Q&A: Troubleshooting Running Light Circuit Not Functioning After Curt Harness # 56200 Install
- Q&A: Running Light Voltage is Good Going in But Not Coming Out of Trailer Wiring Harness C56150
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Mounting Bracket for 4-Pole Flat Trailer Connector
- Shop: Brophy Mounting Bracket for 4-Pole Flat Trailer Connector
- Shop: Spectro 14-Gauge ATO-ATC Fuse Holder - Qty 1
- Shop: Replacement In-Line Fuse Holder for Curt Wiring Harness - Qty 1
- Video: Curt Wiring Harness Installation - 2012 Dodge Grand Caravan
- Shop: Hopkins Endurance 4-Way Flat Trailer Connector w/ 48" Harness and Ergonomic Pull
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Search Results: trailer hitch wiring
- Article: Trailer Wiring Diagrams
- Search Results: brake controller
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Shop: Brake Controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Choosing the Right Brake Controller