Trailer Axle Availability that is 85-1/2 Inches Long

Question

Question:

I have a utility trailer 6 1/2 feet wide, and need axle width 85 1/2 inches, hub face to hub face. Do you have?

asked by: Jennings B

1

Helpful Expert Reply:

We do not carry any axles that have 85-1/2 inches from hub face to hub face. The closest we have would be 89 inches from hub face to hub face like part # T3584F-EZ-8974.

This axle also has 74 inches from spring centers.

expert reply by: Jameson C

1

Answer 1

The spring seat dimension will depend on the width of the trailer frame that the leaf springs would mount to. So typically from center of frame channel to center of the other side is the leaf spring seat to seat dimension you'd need for the axle.…

view full answer...

Answer 2

It sounds like you're trying to find a replacement axle for your trailer. In order to do that you'll want to also take into account the width of the tires/wheels you intend to use, along with the spindle length. With this in mind, you will…

view full answer...

Answer 3

The closest axle we have to fit your measurements is the Dexter Axle #T3584F-EZ-8974. This has a hub face of 89 inches, spring center of 74 inches, 3500 pound capacity and EZ-Lube Spindles. It is not a drop axle like yours is currently. To gain the…

view full answer...

Answer 4

Removing a damaged spindle is the easy part - it can be cut off with a torch or saw. But welding on a new one is another matter and requires the new spindle be welded exactly straight. It is actually easier to replace the entire axle with a new one…

view full answer...

Answer 5

It sounds like you have a different size axle than anything we carry. The closest we have is the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 5.2K #8327816-EB which has spring centers at 71-1/2 inches…

view full answer...

Answer 6

Based on the pictures you attached and the outer bearing measurement you provided, it appears that you have 1-1/16 inch spindle like the BTR EZ Lube Spindle #TRU44FR. This particular spindle is designed for 2,000 pound axles and will use the same…

view full answer...

Answer 7

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Answer 8

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 11

To determine if there are compatible hubs and associated bearings to replace your current hubs to a more standard size you will have to take several precise measurements on the spindle of your axle. It is recommended to use a set of dial calipers to…

view full answer...

Answer 12

The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063" diameter L44649 bearing and the BT8 spindle uses a 0.99" diameter L44643 bearing. In…

view full answer...

Trailer Axle Availability that is 85-1/2 Inches Long

Product Page this Question was Asked From

Continue Researching