Dimensions of the Curt Weld-On Hitch # E17

Question

Question:

subject is E17 could I have the dimensions for that please a side view would be great I know its a 2x2 tube I need to know the plate dimensions and where on the tube the plate is placed. thanks if you have a blueprint jpeg to send that would help me.

asked by: George

0

Expert Reply:

I attached a picture that I edited that shows the dimensions of the Curt Hitch part # E17 that you referenced. The side bracket measures 4-1/2 inches tall by 5-1/2 inches long, and from the bottom of the bracket to the hitch opening is 2-3/4 inches.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Thank you for reaching out and providing all of the details! I have a solution for you to extend the Yakima OnRamp Bike Rack for 2 Electric Bikes #Y36FR further out from your Arctic Fox 5th wheel RV but I think it's at least worth noting 2…

view full answer...

Answer 2

Since the Curt Front Mounted Trailer Hitch Receiver #31302 is going to mount in the same location and interfere with the supports on the Ranch Hand Grille Guard on your 2004 Chevrolet Tahoe Z71 you will not be able to use then together. Rather you…

view full answer...

Answer 3

The plates on the Curt Weld-On 2" Receiver for Custom Fabricated Hitches #E17 are 1/4" thick. The receiver tube is 2-1/2" wide, or 3" if you count the collar at the opening. For a tube size, I would discuss that with the…

view full answer...

Answer 4

The Curt Trailer Hitch Receiver #C15410 has a measurement of 12-1/2" from the face of the receiver to the bolt hole nearest the receiver. I have attached a picture showing the dimensions for the bolt holes as well as the receiver distance. The…

view full answer...

Answer 5

We haven't had the opportunity to obtain video footage of the #31310 front mounted hitch install, but given the to-scale diagram I've provided from the installation instructions, once the hitch is installed the top of the receiver tube will…

view full answer...

Answer 6

From your description it sounds like you are talking about the weldment that comes with the Buyers Products Adjustable Tri-Ball Hitch - Solid Shank #3371802225 (see attached picture) which is part #3373001727 and the Buyers Products Tri-Ball Hitch…

view full answer...

Answer 7

You can install your Tekonsha Prodigy P3 #90195 in your 2005 GMC C4500 Topkick, but, your vehicle does not have a brake controller port, so there is no adapter. But, never fear, there is a way to use your Prodigy with your truck. The P3 will need to…

view full answer...

Answer 8

The Curt A-Series line is the premium version over the Q-Series line and comes with a few differences. One major difference being the jaw design for the A-Series, which overlaps itself instead of just butting up to itself like the Q-Series does. This…

view full answer...

Answer 9

Yes, either the top or the bottom hitch opening on the Roadmaster adapter part #RM-077-4 can be used when flat towing a vehicle. I attached a picture that shows it used "upside down."

view full answer...

Answer 10

Curt Class V hitch #C15300 is a confirmed fit on your 1987 Ford F-150. To help you determine if it will be compatible with your skid plate I went to our warehouse and took a measurement of the hitch to find out the distance from the mounting brackets…

view full answer...

Answer 11

I checked with Curt and the distance between the vertical mounting flanges of the Curt #C15300 is 33.312 inches.

view full answer...

Dimensions of the Curt Weld-On Hitch # E17

Product Page this Question was Asked From

Continue Researching