What Size Fasteners are Used to Install a Draw Tite Hitch on a 2010 Toyota Corolla
Question:
I have a part number 24913 hitch for my 2010 corolla s. The bolts I have seem like they are to big to fit in the holes. Is their any way possible you can tell me what the bolt size is so I can get new bolts and see if they will work or if their is just a problem with the threads on my car i tried cleaning them out and I still cant get the bolts I have to fit in any of the holes. Thankyou
asked by: Dustin W
Helpful Expert Reply:
The bolts included with the hitch # 24913 are M12-1.25x30 mm. Most likely you have the correct hardware and the weld nuts just need further cleaning.
Cleaning weldnuts out on a vehicle in order to install a trailer hitch takes a lot of time and elbow grease. Basically the weldnuts may appear to be clean but getting all of the grime out can take longer than you might think. Make sure you are use a lubricant like WD-40 or PB Blaster.
Check out he video and FAQ article I attached to the right that details how to clean out weld nuts.
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Best 2011 Toyota Corolla Trailer Wiring Options
- Shop: Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Video: Cleaning Weld Nuts for Trailer Hitch Installation
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Replacement Hardware Kit for Trailer Hitches
- Q&A: Bolt Hole Dimensions for Trailer Hitch Receiver Fit on 2005 Toyota Corolla
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Video: etrailer.com Trailer Hitch Installation - 2015 Toyota RAV4
- Article: How to Choose a Hitch-Mounted Bike Rack
- Shop: Battery Post and Terminal Cleaner - Wire Brush
- Shop: Cleaning Brushes - Brass, Nylon, and Stainless Steel Bristles - Multi Purpose - 3 Pieces
- Q&A: Recommended Trailer Hitch Receiver and Bike Rack for 2010 Toyota Corolla S
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Towing Capacity of Trailer Hitches that Fit 2009 Toyota Corolla
- Video: Trailer Hitch Installation - 2013 Toyota Corolla - Curt
- Video: Curt Trailer Hitch Installation - 2019 Toyota Corolla
- Video: Trailer Hitch Installation - 2009 Toyota Corolla - Curt
- Video: Trailer Wiring Harness Installation - 2016 Toyota Corolla
- Shop: Roof Rack
- Q&A: Towing Capacity, Trailer Hitch and Wiring for a 2013 Toyota Corolla
- Q&A: Platform Bike Rack Recommendation for 2013 Toyota Corolla S
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
on Trailer Hitch
