Install Pictures of the Curt Hitch part # C11333

Question

Question:

Do you have an image of this hitch installed on a 2012 Countryman?

asked by: Emily

0

Expert Reply:

I attached the only install pictures we have of the Curt Hitch part # C11333 installed on a Mini Countryman like your 2012 model.

expert reply by: Jameson C

0

click to enlarge

Answer 1

For your 2015 Mini Countryman S the hitch I recommend is the M7 Speed hitch part #327-60-160200 that you referenced. It's the easiest to install and has a 2 inch opening with plenty of capacity for a 700 lb boat trailer. For trailer wiring…

view full answer...

Answer 2

The overhang of the rack is the length from the outside edge of the M7 Speed Hitch - 2" #327-60-160200 receiver tube to the longest extended point of your bike rack. It is simply how far the bike rack extends from the insertion point of the…

view full answer...

Answer 3

I recommend the Curt Trailer Hitch Receiver #C11333 for your 2012 Mini Countryman. It will be able to support the Thule EasyFold XT Bike Rack #TH903202, as it has a 200lb tongue weight capacity. With the M7 Speed MINI Ultimate Utility Hitch Receiver…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 6

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 7

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 9

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 10

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Install Pictures of the Curt Hitch part # C11333

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching