How Many Holes Get Drilled to Install the CargoSmart Wheel Chock # 3481731

Question

Question:

How many holes are needed to mount on the trailer?

asked by: Pat

1

Helpful Expert Reply:

According to the installation instructions you will use 4 attachment points when installing the CargoSmart Motorcycle Wheel Chock for E-Track or X-Track Systems - 7" Wide Tires Item # 3481731 to your trailer. So you will need to drill 4 holes. I recommend adding the Snap-Loc E-Track Tie-Down Anchor - Square Mounting Hole - Bolt On - 1,000 lbs - Matte Zinc - Qty 1Item # SLSZ to attach the chock to the floor of your trailer.

expert reply by: Jameson C

1

Answer 1

Yes, the Erickson Horizontal E-Track part #E19148 will be plenty strong enough to secure your two rock crawler buggies. The tracks are each rated at 6,000 lbs max break strength and 2,000 working load limit. I assume you would have a track under each…

view full answer...

Answer 2

Typically for wood floors we recommend using backing plates like the part #e96RR with the E-tracks like part #E19148 that you mentioned. I attached an install video for an E-track that shows the backing plate being used as well.

view full answer...

Answer 3

Since I don't have your toy hauler and bikes in front of me, it is going to be difficult to make a specific recommendation for set-up but if it were me I would use a few pieces of scrap lumber or cardboard cut to the size of the E-Track pieces to…

view full answer...

Answer 4

That sounds like a great plan, the E-Track part #E19148 will provide a great tie-down point for securing the motorcycles. For tie-down rings you would want the #59131 and then for a wheel chock I would recommend the #3481731 because of how well it…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 7

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 8

Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…

view full answer...

Answer 9

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 10

The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…

view full answer...

Answer 11

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...