Do the Camco RV Refrigerator Vent Cover Base CAM42161 and Top CAM42160 Fit Each Other?

Question

Question:

Does the camco 42161 and 42160 refrig base and cover fit each other

asked by: Duwane W

0

Expert Reply:

Yes, they do! The Camco RV Refrigerator Vent Cover - Base item # CAM42161 and the Camco RV Refrigerator Vent Cover - Top item # CAM42160 do indeed fit each.

expert reply by: Jerred H

0

Answer 1

I am sure we do but I do not have any way of knowing what size cutout your Fleetwood Southwind RV has so you'll need to take a measurement. The Dometic RV Refrigerator Roof Vent Cap and Base item #DMC97FR, you were looking at, is designed to fit…

view full answer...

Answer 2

The RV Refrigerator Roof Vent Cap and Base item #DMC37FR needs to be mounted to the roof from the outside.

view full answer...

Answer 3

The RV Refrigerator Roof Vent Cap and Base #DMC37FR comes with the vent cap and the base. Installation hardware is not included. We do have installation hardware available. The Camco RV Vent Installation Kit #CAM25013 if you have a rubber roof or the…

view full answer...

Answer 4

The RV Refrigerator Roof Vent Cap and Base #DMC37FR will fit with your Dometic refrigerator DM2652. You will want to verify the cutout size on the roof if this is not the original refrigerator for your camper. This vent is designed for a 23-3/8"…

view full answer...

Answer 5

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 6

The Dometic Ultra Breeze Trailer Roof Vent Cover part #DMC38FR installs using brackets which secure to the vent lid flange. The brackets are screwed into the roof but the cover is attached to the bracket using pins and is easily removeable. I have…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey David, we've used the LaSalle Bristol RV Roof Vent install kit part #344270KITW to install several MaxxFan RV roof vents and it's worked well so it would also work well for you. This comes with everything needed so it would be a great…

view full answer...

Answer 9

Hi Eric; the Curt Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger #C52044 will work for your triple axle Kaufmann trailer. This is designed for 1 to 3 axle trailers with electric brakes so triple axle isn't a problem. As long as…

view full answer...

Answer 10

The Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR is a single zone 3 wire thermostat like the one you are describing. I have attached the wiring diagram for this thermostat and the control box below for your reference.

view full answer...

Answer 11

I recommend the Alpha Systems Butyl Tape for RV Weatherproofing #AL28FJ as it's 1" wide to fully cover the flange of your vent. Make sure you overlap the ends to form a tight waterproof seal. You can see me doing this at 2:50 mark in the…

view full answer...

Answer 12

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...