Do Brophy Slide-In Camper Tie-Downs Fit a Dually

Question

Question:

Hi Looking at the brophy tie downs. Do they fit a dually? Thanks

asked by: Terence

0

Expert Reply:

Yes, the Brophy Slide In Camper Tie-Downs # HSAB will fit a dually. They simply require your truck to have at least 2" between its sidewall and lip of the bed rail, and you can't have a drop-in bed liner, aftermarket bed rails, double-walled bed, or side-step bed.

expert reply by: Kyle S

0

Answer 1

The Brophy Clamp On Camper Tie-Downs #HSWB that you referenced are designed to clamp over the bed rails and looking at pictures online of the dually model for your 2017 Ram 3500 I think the extended/protruded wheel wells on the truck are going to…

view full answer...

Answer 2

Hi Mark, thanks for the question and yes, the Brophy Slide In Camper Tie-Downs #HSAB for your 2024 Ram 3500 are sturdy enough for your Lance 825 slide-in camper. These will work so long as you do not have the RamBoxes in your truck, and while the…

view full answer...

Answer 3

While there isn't a specific weight capacity for the Brophy Clamp On Camper Tie-Downs #HSAB there is a 3,000lb capacity for the turnbuckles #TDHP that go along with these tie-downs. To ensure fitment of these tie-downs your truck will need to…

view full answer...

Answer 4

The Brophy Clamp On Camper Tie-Downs, #HSAB are 3/8" thick. So for a snug fit to your topper they will need to be removed or you will need to adjust for this dimension within the seal of where your topper comes into contact with the bed rails.

view full answer...

Answer 5

I have a solution for you, but the HappiJac FT-UT9 is designed for older model Dodge and Ford trucks, so they're not the correct tie downs. Additionally, there is not a HappiJac tie down that we have available for your 2020 Ram 3500 dually long…

view full answer...

Answer 6

The BROPHY Angled Hold-Downs for Truck Bed Campers, part #HSAB should work well for your 2000 Dodge Ram 2500. These tie-downs are not designed to work with trucks with drop-in bed liners, plastic bed rails, side-step beds, and double-wall beds, so if…

view full answer...

Answer 7

Installation of the TorkLift Camper Anchor Relocation Kit #TLA7004 for your dually truck will require drilling into the adapter bracket in order to attach it to the camper's rear anchor point but you will not need to drill into your camper…

view full answer...

Answer 8

Yes you are correct. The Torklift Camper Tie Downs part #TLD2140 and #TLD3112 are the correct tie downs for your 2022 Ram 3500 Tradesman, dually, long bed without boards or steps.

view full answer...

Answer 9

The Torklift #TLA7004 Camper Anchor Relocation Kit does not require drilling into the camper or the truck. The adapter brackets would be attached to the camper by drilling holes at the location of the original anchor point, as shown in the photo…

view full answer...

Answer 10

I spoke with my contact at Brophy and they agree that it is okay to just use the turnbuckles without the chains and S hooks that are included in the hardware package.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Do Brophy Slide-In Camper Tie-Downs Fit a Dually

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching