Review of TorkLift Camper Anchor Relocation Kit - TLA7004 Video

I checked with TorkLift for you, and they do have a hitch that fits a 2022 Ram 4500 cab and chassis, with the correct fit being the following: - TorkLift SuperHitch Magnum Trailer Hitch Receiver #TL49YR Then, because of the overhang you mentioned,…

Yes the TorkLift Camper Anchor Relocation Kit #TLA7004 that you referenced will work great with your Northstar Laredo SC tiedowns. Torklift states that this adapter is normally needed if the distance between the front bumper of your camper and the…

I spoke with Torklift about the TorkLift Camper Anchor Relocation Kit part #TLA7004 and they informed me that you could easily shorten the length if needed by simply overlapping the pieces of angle iron and then just drilling new holes to secure the…

It sounds like you're looking for the TorkLift Camper Anchor Relocation Kit #TLA7004. These bolt onto your truck-bed camper to relocate the anchor points if the distance between the front bumper of your camper and the center of the rear anchor…

I attached a picture that has basically all of the dimensions you'd ever want for the Brophy Tie Down Kit part #HSAB. These will fit your 2014 Ram 2500. If you check out the install video I attached you'll see the kit installed on a similar…

The camper tie-downs that fit your 2018 Ram 3500 Crew Cab with factory trailer hitch and Bestop running boards, so long as you have an 8 foot bed, are TorkLift Custom Frame-Mounted Camper Tie-Downs #TLD2127 for the front and #TLD3109 for the rear…

Yes the TorkLift Camper Anchor Relocation Kit #TLA7004 that you referenced was designed specifically for what you are looking for. It relocates the attachment point to an area that allows more clearance.

For your Ford F-550 with a CM SK model flatbed, you are limited as to the adapters that will work. Because your ball is recessed 2 inches, the space around that may or may not allow for an offset. I have a couple options for an offset adapter. The…

The correct Torklift Camper Tie Downs for your 2022 Ram 3500 would be the part #TLD2141 and #TLR3510 which is also correct for use with the Torklift 30k hitch that fits your truck part #TLD1111-30. Since you have a dually you will also need to…

In regards to the Curt Hitch Extension and Reducer part #C45048, there isn't a device that is designed to stop side to side sway. That said, so long as you stay within the listed weight capacities then you will not have any issues. The TorkLift…

You'll be able to reuse your rear tie down part #TLD3112 but you will have to replace the front tie down with part #TLD2142 as the short bed trucks use a different front tie down part #TLD2141.

Yes the Torklift Camper Tie-Downs will work fine with your 2022 Ram 3500 with factory air suspension. You can use the: -TorkLift Custom Frame-Mounted Camper Tie-Downs #TLD2140 if you have an 8' bed, or the: -TorkLift Custom Frame-Mounted Camper…