Recommended Hitch for a 2024 Honda HR-V

Question

Question:

Does this hitch fit a 2024 Honda HR-V?

asked by: Clayton

0

Expert Reply:

Yes, it does! The Curt Hitch item # C68DR is the only hitch that has been confirmed to fit your 2024 Honda HR-V. It is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight.

If you are planning on towing you will also need a wiring harness item # C44NR and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball. Edit Reply

expert reply by: Jerred H

0

Answer 1

Yes, we do! To add a hitch to your 2024 Honda HR-V, I recommend the Curt item #C68DR. This class I hitch is custom fit and bolts to your Honda with included hardware. This hitch has a 1-1/4" receiver that has a 2,000 lbs towing capacity and a…

view full answer...

Answer 2

Yes, we have the Curt Trailer Hitch Receiver #C68DR which will fit your 2024 Honda HR-V. This hitch has a GTW of 2,000 lbs, a tongue weight capacity of 200 lbs, and has a relatively simple bolt on install.

view full answer...

Answer 3

For your 2018 Honda HR-V, I recommend the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" #306-X7322. This is the only 2 inch receiver we have compatible with your vehicle and you will need a 2 inch receiver for most carriers compatible…

view full answer...

Answer 4

We do have a couple cargo carriers available that are compatible with Class I hitches that might work well to transport your mobility scooter, such as the Reese #63155. This is a really nice carrier that features inside/usable dimensions of 47 inches…

view full answer...

Answer 5

I have you covered! I believe you are talking about a 2" trailer hitch receiver for your 2018 Honda HR-V. If that is what you mean, the only one we carry is the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" #306-X7322. Not only…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

The best hitch for your 2023 Honda HR-V is going to be the Curt Trailer Hitch item #C68DR. This hitch is custom fit and bolts to your Honda with included hardware. I really like this hitch because it mounts between the bumper bar and your bumper…

view full answer...