Can Curt E16 Fifth Wheel Hitch be Used in Pucks of 2018 Chevy Silverado

Question

Question:

can I use this hitch with a adaptor plate for a 2018 duramax with recessed holes below the bed rails?

asked by: David

0

Expert Reply:

You can use the Curt E16 fifth wheel hitch part # C16115 in the bed of your 2018 Chevy Silverado with the OEM pucks but you would need to use the adapter part # C47BR which converts the pucks to the rail kit style this hitch needs.

expert reply by: Jameson C

0

Answer 1

Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider isn't required. So if the trailer you plan to tow has a tapered nose…

view full answer...

Answer 2

Sliding 5th wheel hitches are required for making sharp low-speed turns when towing a 5th wheel trailer with a short bed truck. If you are towing with an 8-foot bed pickup you do not need a slider hitch. We have NOT heard of any brand or model of 5th…

view full answer...

Answer 3

You can use the Curt E16 fifth wheel hitch part #C16115 in the bed of your 2018 Chevy Silverado with the OEM pucks but you would need to use the adapter part #C47BR which converts the pucks to the rail kit style this hitch needs.

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 8

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 9

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 10

Yes you are - all 5th wheel hitches are going to require some type of rails in order to be used. So you'd need #DM8552016-71 for your 2006 Dodge Ram.

view full answer...

Answer 11

Yes, it will! The B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches item #BWRVR3200 includes industry standard 5th wheel rails that are compatible with the Reese 30032 5th wheel hitch. The Reese 30032 uses the same…

view full answer...

Answer 12

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Can Curt E16 Fifth Wheel Hitch be Used in Pucks of 2018 Chevy Silverado

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching