Gooseneck Hitch Solution for 2013 Chevy Silverado 3500 Cab and Chassis

Question

Question:

I have a 2013 Chevrolet 3500 Silverado W/T crew cab long wheel base cab and chasis truck. Will this work on it? Thanks!

asked by: JR B

0

Expert Reply:

Since your 2013 Chevy Silverado 3500 is a cab and chassis model you'll need to use the B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks # BWGNRK1500. There are other B&W gooseneck hitches that will fit a 3500 but those are designed for if you have the factory truck bed. Cab and chassis models are a bit different as the frame is narrower so this universal design for a flatbed is what you'll want to go with.

expert reply by: Jameson C

0

Answer 1

The template for correctly locating where to drill the 4 inch diameter hole through the truck bed is indeed included with the kit, as shown in the parts list from the installation instructions. You can look over the instructions by using the provided…

view full answer...

Answer 2

When installing the Draw-Tite Hide-A-Goose hitch #9465-56, the hitch ball hole location is 45-3/8 inches from the rear of the truck bed and is centered between the wheel wells. For the B&W Turnoverball Underbed Gooseneck #BWGNRK1012, the hitch…

view full answer...

Answer 3

The correct installation kit for a 2011 Chevy Silverado 2500 is #C60604. It will fit with the Curt Double Lock, Flip and Store gooseneck hitch; Curt Quick Goose 2 gooseneck hitch; or Curt Underbed, Folding gooseneck hitch. I have linked instructions…

view full answer...

Answer 4

Realistically there isn't a noticeable difference between the two Curt gooseneck hitches that both fit your 2013 Chevy Silverado 2500HD. Both the #C607-604 and #C611-624 are a great fit that will for all intents and purposes work just as well as…

view full answer...

Answer 5

The heat shield does have to be removed to install B&W gooseneck trailer hitch #BWGNRK1016 on your 2016 GMC Sierra 3500 because it is in a position that interferes with the hitch installation. All of the gooseneck hitches for your truck will…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The etrailer E-Track Roller Idler #e67HR is 3" from the top of the e-track to the bottom of the roller.

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

We don't have an option that will allow for all of them to be keyed alike but I can get you down to one key for the hasp locks and another for the coupler lock. The Trimax Puck Locks for Trailer Door Hasps #TMX73FR comes with three keyed-alike…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

view full answer...