Installation Kit for a Curt Gooseneck Trailer Hitch for a 2011 Chevy Silverado 2500 Long Bed

Question

Question:

I had a pop up gooseneck hitch, on my 2005 chevy silverado. I was able to take out the hitch portion to re-install in my 2011 chevy silverado 8ft bed. Is it possible to purchase the installation kit without the hitch?

asked by: Ron P

0

Expert Reply:

The correct installation kit for a 2011 Chevy Silverado 2500 is # C60604. It will fit with the Curt Double Lock, Flip and Store gooseneck hitch; Curt Quick Goose 2 gooseneck hitch; or Curt Underbed, Folding gooseneck hitch. I have linked instructions for the installation kit.

expert reply by: Michael H

0

Answer 1

The gooseneck hitch you have is the Curt 600 Series part #C60604 which is just the rail kit of the #C607-604 that you referenced. I attached a link to the install instructions and an install video for the hitch for you to check out as well. If your…

view full answer...

Answer 2

In step 2 of the instructions for the B and W Turnover Gooseneck Hitch part #BWGNRK1012 that you referenced you will end up removing the heat shield. Some of our customers have reported back saying that they did not have to remove it but others said…

view full answer...

Answer 3

Realistically there isn't a noticeable difference between the two Curt gooseneck hitches that both fit your 2013 Chevy Silverado 2500HD. Both the #C607-604 and #C611-624 are a great fit that will for all intents and purposes work just as well as…

view full answer...

Answer 4

The template for correctly locating where to drill the 4 inch diameter hole through the truck bed is indeed included with the kit, as shown in the parts list from the installation instructions. You can look over the instructions by using the provided…

view full answer...

Answer 5

When installing the Draw-Tite Hide-A-Goose hitch #9465-56, the hitch ball hole location is 45-3/8 inches from the rear of the truck bed and is centered between the wheel wells. For the B&W Turnoverball Underbed Gooseneck #BWGNRK1012, the hitch…

view full answer...

Answer 6

Since your 2013 Chevy Silverado 3500 is a cab and chassis model you'll need to use the B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks #BWGNRK1500. There are other B&W gooseneck hitches that will fit a 3500 but those…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The etrailer E-Track Roller Idler #e67HR is 3" from the top of the e-track to the bottom of the roller.

view full answer...

Answer 10

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 11

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 12

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

view full answer...

Installation Kit for a Curt Gooseneck Trailer Hitch for a 2011 Chevy Silverado 2500 Long Bed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching