Wire Harness Needed To Flat Tow A 2023 Jeep Gladiator

Question

Question:

Not sure wiring kit I need to have Lights on My Tow Vehicle. 2023 Jeep Gladitor. Have a Roadmaster Tow Bar

asked by: Ricky E

0

Expert Reply:

For a 2023 Jeep Gladiator you'll want the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267, unless your Gladiator has ParkSense Proximity Sensors. If it does then you'll need the Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights # RM63MR instead.

If you haven't picked out the rest of your flat towing components or have other questions please let me know and I'd be happy to help.

expert reply by: Kevin C

0

Answer 1

Yes the Roadmaster taillight converter part #RM-732 is the correct adapter you'd need to combine the separate taillight circuits of your tow vehicle so you could connect them to your trailer properly.

view full answer...

Answer 2

From the information I have, it looks like the rear clearance light and the rear tail light signals run through 2 different wires, so my guess is you have the diode installed on the clearance light wire instead of the running light/park lamp wire.…

view full answer...

Answer 3

To determine if your 2014 Jeep Grand Cherokee will require a brake light relay like part #RM-88400 you need to answer the following questions: Are you using a supplemental braking system that depresses the brake pedal in your towed car? No - You do…

view full answer...

Answer 4

We have a few great options for wiring up your 2000 Jeep Cherokee so that it accepts the signal lights from the RV when being towed, and I specifically recommend the Roadmaster Diode Flexo-Coil Wiring Kit #RM-15267. This kit includes everything…

view full answer...

Answer 5

Since your tow vehicle has separate turn signal circuit from stoplight circuits you'll need a taillight converter to make put them all on the same wire with the part #RM-732. Once you wire this to the vehicle wiring you mentioned you'll be…

view full answer...

Answer 6

Yes, the Roadmaster Brite-Lite Converter, #RM-732, will help convert the 3 wire signal from your motor home to the two wire signal to you flat towed vehicle. The Brite-Lite converter can also increase the light intensity of your turn and brake…

view full answer...

Answer 7

Your Jeep does not have turn signal lights separate from the brake lights so you will not need the RM-732, Roadmaster Brite-Lite Wiring Converter. Your RV already has the 4 and 7 pole connectors wired so the RV already has a converter if it was…

view full answer...

Answer 8

The LED lights on your 2018 Jeep Wrangler JL use the same wiring harnesses available for incanescent lights. I've linked our selection for you. I like to recommend the diode kit, part #RM-15267, because it installs a 6-way at the front of the…

view full answer...

Answer 9

It depends. If your 2006 Itasca motor home has a trailer connector in it already, whether it is a 4-Way flat or 7-Way RV style, the circuits for the brake lights and turn signals are already combined. This is what the diode kit #RM-154 requires. So…

view full answer...

Answer 10

I can completely understand the confusion, but to make it easy, if you have the new body Jeep Grand Cherokee, then you have what is known as the Jeep WK and if you have the new body style it is known as the JL. I'm not entirely sure why Jeep does…

view full answer...

Answer 11

If your brake and turn signal lights are not working on your tow car, then start by checking the fuses in your RV to see if everything checks out. You will also want to check your connectors to see if there is any type of corrosion which may be…

view full answer...

Answer 12

To flat tow your 2024 Jeep Wrangler Unlimited you will need the following parts: Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item #RM-520 and item #RM-643 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item…

view full answer...