Is There a BOLT Hitch Receiver Lock Rated Higher Than 16,000lbs For a 2024 Chevy Silverado 2500?

Question

Question:

Is there a version of this with a higher weight rating?

asked by: Andy M

0

Expert Reply:

Currently BOLT only makes the single Hitch Receiver Lock # BL7023582 which is rated for 16,000lbs. As an alternative check out the InfiniteRule Hitch Lock # 34061072-D. This stainless steel lock has a 42,000lb shear strength and since it has its own key you will be able to keep it in the future when you get a new truck down the road.

expert reply by: Bud M

0

Answer 1

We have an adjustable ball mount that was designed to fit with the MultiPro tailgate of your 2020 GMC 2500 and the 2.5 inch hitch with the B and W Tow and Stow part #BWTS20066BMP but the two you mentioned would not work with the tailgate.

view full answer...

Answer 2

Thank you for the photos and sorry to hear about your truck! The unique design of the B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate #BWTS20066BMP is that angled section that meets with the shank part of the ball mount. On…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Hey Mark, since we know your Brinkley Z3100 has the Rhino style pin box, the correct Gen-Y fifth wheel to gooseneck adapter is the part #GY98GR which comes with the auto latch you mentioned wanting as well!

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

The B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package - Dual Jaw - 20,000 lbs #BWRVK3300 is a confirmed fit for your 2017 Ford F-350 with factory rail kit for 5th wheel. This hitch weighs just under 150 lbs. It does come in…

view full answer...

Answer 9

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 10

Hey Bob, thanks for writing in, and you got yourself one heck of a truck with the 2024 Silverado 2500HD. And though you'll need an adapter since you have the factory prep package you can definitely use the Andersen Ultimate Connection 5th Wheel…

view full answer...

Answer 11

If you have the Gooseneck versions of the Curt CrossWing ( #C92DR or #C32DR) you unfortunately would not be able to use the Rota-Flex with it. The pivoting head causing too much strain for the single point of contact you have with a gooseneck hitch.…

view full answer...

Answer 12

Yes there is! The Husky 31326 hitch is made to fit the industry standard fifth wheel rails (ISR). The Curt Adapter #C88KR is also made to the same industry standard measurements. So the Curt Adapter #C88KR will be exactly what you need to use your…

view full answer...