Fit of Draw-Tite Class III Hitch # 75034 on 1996 Chevy 1500 C/K Series Pick Up

Question

Question:

Hi, I have a 1996 Chevy 1500 4x4 short bed. Will the 75034 fit my application?

asked by: Clem

0

Expert Reply:

Draw-Tite offers a Class III hitch, part # 75033 that is a confirmed fit for your truck. The hitch has the same capacity as the one you mentioned, and the hitch is similarly priced. You can see the installation instructions by clicking the provided link.

The Draw-Tite Class III hitch you referenced, part # 75034 fits Chevy C/K Series pick up trucks from 1963-1987, so it is not a fit for your 1996 model.

You might also need the following to complete your towing system:
Trailer Wiring Harness w/ 4-pole trailer connector, part # 118315
Ball Mount, part # 2753
Pin and Clip, part # PC3
Locking Hitch Pin, part # e98882
2 Inch Trailer Ball, part # 63845
1-7/8 Inch Trailer Ball, part # 19260

If you'll be towing a heavier trailer with brakes, you'll also need a brake controller. I'd recommend the Tekonsha Prodigy P2, part # 90885 and the Brake Controller Installation Kit, part # ETBC7.

expert reply by: Mike L

0

Answer 1

The Draw-Tite trailer hitch, #75033, will fit the 1998 Chevy C/K. The Draw-Tite trailer hitch, #75037, will fit the 1995 Chevy Suburban. But they are not interchangeable. The hitches are designed to fit the construction and shape of specific…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Fit of Draw-Tite Class III Hitch # 75034 on 1996 Chevy 1500 C/K Series Pick Up

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching