Will Curt Trailer Hitch # C11234 Mount Fit a 2014 Volkswagen Passat TDI

Question

Question:

Good afternoon - Will this hitch fit on the TDI version of the Passat 2014. I understand that the Adblue tank creates an interference.

asked by: David M

0

Expert Reply:

Curt trailer hitch # C11234 is listed as a fit for the 2014 Passat TDI with the 2.0 liter motor. I have linked a video showing installation and a link to the instructions. It is possible that the extra tank on the diesel may make installation a little more difficult if it is in the way. Take a look at the instructions and video then compare them to the underside of your car to determine if there will be any issues.

expert reply by: Michael H

0

Answer 1

The 2" EcoHitch #306-X7284 for your 2014 VW Jetta SportWagen Diesel takes much longer to install than the 1-1/4" Draw-Tite #24880 for your 2017 VW Passat 1.08T SE. From what I could find it looks like the Passat tends to have a hitch…

view full answer...

Answer 2

I found a hitch that will work for your 2014 Volkswagen Passat TDI. The Draw-Tite Class I Receiver Hitch, #24880, is the hitch that I recommend for you vehicle. The Draw-Tite hitch is custom-fit for your 2014 Volkswagen and will install to the frame…

view full answer...

Answer 3

The correct Curt Trailer Hitch Receiver for a 2015 Volkswagen Passat TDI 2.0L I4 is actually part #C11234, not part #C11232 which is for the 1.8L I4

view full answer...

Answer 4

The Curt hitch part #C11234 that you referenced has been confirmed as a fit for the TDI models of the 2013 Volkswagen Passat and does not have any exclusions for manual transmission models so it would work well for you. I attached an install video…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Will Curt Trailer Hitch # C11234 Mount Fit a 2014 Volkswagen Passat TDI

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching