Help Reducing The Chances Of Water Getting Inside The CE Smith Hub Assembly # CE13511
Question:
I have 13511 hubs on my boat I installed this past spring with bearing buddies,,I checked my hubs for winter storage and one hub had creamy grease,must of got some water in through seal or bearing buddy,,,,,,my question,would I be better off with dust cap and rubber plug , and forget about using bearing buddies ,,,thanks
asked by: Dave B
Expert Reply:
First be sure to check your Grease Seal # 58846 for any signs of damage on your CE Smith Hub Assembly # CE13511. The Grease Cap # F001518 would be a better option than the one with a rubber grommet since it is another part which can fail.
Personally I prefer the Bearing Buddy Bearing Protectors # BB1980A which have the auto check feature. The addition of the spring allows you to easily see the hub is full of grease and the tension the spring puts on the grease helps to keep water from having a place to go inside the hub. You cannot get this by just using a standard cap.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Grease Cap - 1.988" Outer Diameter - Drive In
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- CE Smith
more information >
Continue Researching
- Shop: Kodiak XL ProLube Kit for 3500-lb Axles
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Search Results: bb1980a
- Search Results: 58846
- Shop: DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug - 1.98" Outer Diameter
- Shop: DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug - 2.45" Outer Diameter
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: Review of DeeMaxx Trailer Bearings Races Seals Caps - Stainless Steel Grease Cap with Plug - DE79YR
- Video: CE Smith Trailer Hub Assembly Review and Installation
- Search Results: 13511
- Search Results: hub dust caps
- Search Results: seals for trailer bearings
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Shop: Trailer Hitch
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Q&A: Replacement for Demco Master Cylinder 05680-C for Drum Brakes
- Search Results: tang washer
- Article: How to Charge a Dump Trailer Battery
- Q&A: 05680-C Master Cylinder Replacement for Trailer Recommendation
- Video: NOCO GEN On-Board AC to DC Battery Charger Review
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Brake Controller
- Article: Brake Controller Installation: Starting from Scratch
- Video: Dexstar Tires and Wheels - Wheel Only - AM20535 Review