Wiring Directions For Bargman LED Recessed Double Tail Light

Question:

i have the same harness as explained but no extra signal/ brake light....how di i wire to have working brake and signal lights through just this fixture ????

asked by: Dewey W

Expert Reply:

The Bargman LED, Recessed, Double Taillight # 47-84-527 is designed to go on either the left or the right side of your trailer. You would wire it up to the trailer wiring by function. So, if you were installing this on the driver side of your trailer you would wire it up as:

Black wire of the light to the yellow wire of the wiring
Green wire of the light to the brown wire of the wiring
White wire of the light to the white wire of the wiring

For the passenger-side light, you would wire it up like this:

Both Black wires of the light to the green wire of the wiring
Both Green wires of the light to the brown wire of the wiring
White wire of the light to the white wire of the wiring

If your trailer wiring does not have the same colors mentioned above, you can use a circuit tester like part # PTW2993 to test the wires by function and not color.

I have attached a helpful article on trailer wiring that you can check out and also a product review video for this light you can take a look at.