Recommended Replacement Anode Rod for a Suburban SW6DE Water Heater

Question

Question:

I have a suburban water heater in my camper. Model# sw6de. I am looking for an anode rod with drain. I found one for Atwood heaters. Are they compatible with suburban?

asked by: Frankie

1

Helpful Expert Reply:

Yes, the Camco RV Water Heater Anode Rod # CAM11563 you're looking at will work fine with your Suburban water heater.

Since your water heater takes a 3/4" anode rode, the Camco # CAM11563 will work great.

expert reply by: Bryce D

1

Answer 1

Your Suburban SW6DE takes a 3/4 inch anode rod like the part #CAM11563 which would work well.

view full answer...

Answer 2

The Camco RV Water Heater Anode Rod part #CAM11563 is what you need for the suburban SW6D water heater.

view full answer...

Answer 3

Currently the Retractable Ratchet Strap #Q74FR is our longest at 27' long. This does use 2 flat hooks on each side of the ratchet and is rated for a safe working load of 3,300lbs per strap. If you are looking for a more traditional ratchet strap…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...