What Anode Rod Replacement Does Suburban SW6DE Take

Question

Question:

Which anode rod do I need for a suburban SW6DEL Thx.

asked by: Mike J

0

Expert Reply:

Your Suburban SW6DE takes a 3/4 inch anode rod like the part # CAM11563 which would work well.

expert reply by: Jameson C

0

Answer 1

Based on the part number of your motor the correct circuit board would be the part #MA10A21275K.

view full answer...

Answer 2

Yes, the Camco RV Water Heater Anode Rod #CAM11563 you're looking at will work fine with your Suburban water heater. Since your water heater takes a 3/4" anode rode, the Camco #CAM11563 will work great.

view full answer...

Answer 3

The Curt Tow Bar #C19745 is a universal fit tow bar that is designed to work with vehicles that have a heavy duty front bumper that is rated for towing. If you have this type of aftermarket bumper then you can use it on your 2000 Ford Ranger. I…

view full answer...

Answer 4

The Camco RV Water Heater Anode Rod part #CAM11563 is what you need for the suburban SW6D water heater.

view full answer...

Answer 5

The Camco Water Heater Element #CAM02143 is what you need for the SW6DEL water heater. According to our research this element will replace the heating element perfectly in your Suburban water heater. You can also use the Camco RV Water Heater Anode…

view full answer...

Answer 6

For your Suburban SW6DE, you will want the Camco Water Heater Element #CAM02143 and the anode rod #CAM11563. This water heater will use a combination of electric and gas to heat your water. The electric ignition and element will determine the heating…

view full answer...

Answer 7

The Camco Water Heater Element part #CAM02143 and Camco RV Water Heater Anode Rod part #CAM11563 will both work on a Suburban SW6DE Water Heater.

view full answer...

Answer 8

The replacement anode for your SW6DE water heater is part #CAM11563 while the replacement water heater element is part #CAM02143. The tool you need to remove the element is part #CAM09883. Attached is a video showing how to remove your water element…

view full answer...

Answer 9

Yes, the Camco RV Water Heater Anode Rod, part #CAM11563, is in fact the correct size tap for your SW6DE water heater. It has a 3/4" NPT and 12 threads per inch.

view full answer...

Answer 10

Dometic purchased Atwood a number of years ago and has been slowly phasing out their line of water heaters so there is no longer any GC6AA-10E water heaters available. That being said the Dometic RV Water Heater #DMC74FR is basically the same thing,…

view full answer...

Answer 11

I was looking through the manual for the Suburban SW6DE water heaters and found that the Suburban replacement is similar but shorter than the Camco model #CAM02143. It looks like the original one used in that water heater was discontinued and…

view full answer...

Answer 12

The Camco Wrench for Screw-In Water Heater Element #CAM09883 is a socket for the 1-1/2 inch nut on water heater elements. You can however use a box end wrench, channel locks, or a plumbers wrench if needed. Often sediment and corrosion can make it…

view full answer...

What Anode Rod Replacement Does Suburban SW6DE Take

Product Page this Question was Asked From

Continue Researching