Will Curt Trailer Hitch Fit 2023 and 2024 Kia Niro PHEV

Question

Question:

Just confirming hitch #C77NR fits a 2023 or 24 niro phev. One reviewer said an emissions canister needs to be removed. Is this correct?

asked by: Pam

0

Expert Reply:

The Curt Trailer Hitch Receiver # C77NR will fit the 2023 and 2024 Kia Niro PHEV. Gas models require lowering the emissions canister so the hitch can fit. We have only had the one instance where someone felt the need to completely remove it, but they reinstalled it after. Complete removal is not necessary. It looks like the PHEV does use some gasoline so I would expect to have to lower the canister during installation.

expert reply by: Robin H

0

Answer 1

Only a small part of the underneath bumper panel on your 2024 Kia Niro is needed to install either the Curt hitch that fits, which is the following part number: - Curt Trailer Hitch Receiver #C77NR I added a portion of the instructions which shows…

view full answer...

Answer 2

Although both the Curt #C77NR and #C37BR both look to be identical there is a small difference in the #C77NR that allows it to be compatible with 2022 and 2023 Kia Niro models, whereas the #C37BR is only compatible with 2022 models.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 7

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 8

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 9

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...