Can Dexter Heavy-Duty Suspension Kit Replace 6-1/4 Inch Long Equalizer
Question:
I am wanting to replace my tandem-axle leaf spring suspension with a new wet bolt assembly. I looked at your Dexter kit, Item # K71-359-00, but some of the dimensions were slightly different. I have AL KO Kober axles, 5200 lbs, model T52 3. The axle spacing is 33 with a 1 3/4 double-eye springs. The differences in dimensions from the Dexter kit are as follows: 1 Distance between outer shackle bolt holes, center on center, is 6 1/4 2 Distance between hanger bolt hole and shackle bolt hole, center on center is 3 3/4. 3 Height of side bolt hole to hanger bolt hole is 2 1/8. Shackle links and bolts are the same as in the Dexter kit. Im hoping that you might another product that matches those dimensions. I couldnt find it, but you have a lot of products to look at. I appreciate any help you might have as my old setup has a lot of wear and a new wet bolt assembly would be much better. Thanks
asked by: Nathan A
Expert Reply:
We don't have an exact match, but based on your dimensions the Dexter Heavy-Duty Suspension Kit # K71-359-00 will still work for your trailer. The 1/2" difference in length and 1/8" difference in height won't be enough to impact the performance of your trailer's suspension. If the equalizer was significantly longer or taller it would be best to swap out the equalizer for one that is a better match, but in this case that will not be necessary.
Product Page this Question was Asked From
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- Double Eye Springs
- Tandem Axle
- Dexter
more information >
Continue Researching
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Search Results: k71~449~00
- Q&A: Suspension Upgrade Kit With 3-1/8 Inch Shackle Straps For Tandem Axle Trailer
- Q&A: Can 25-1/4 Leaf Spring and Dexter Axle HD Suspension Kit Fit a 31 Axle Spacing
- Q&A: Hanger Spacing With Equalizer Kit # K71-359-00 with 25-1/4 inch Leaf Springs
- Q&A: Replacement Trailer Suspension Shackles, Equalizers and Bolts
- Q&A: How To Confirm Fit of Dexter Heavy-Duty Suspension Kit K71-359-00
- Q&A: Suspension Won't Settle After Installing the Dexter Heavy Duty Suspension Kit
- Q&A: Compatibility of Dexter Suspension Kit K71-359-00 Where the Equalizer Has a 2 Inch Height Difference
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Search Results: 25580
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Search Results: leaf spring
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Search Results: equalizer
- Shop: Brake Controller
- Article: How to Accurately Measure Trailer Leaf Springs
- Video: Choosing the Right Trailer Wiring
- Search Results: fender
- Shop: Gooseneck Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement