Will Dexter Heavy-Duty Suspension Work on 14,000 lb Trailer
Question:
Have a 2004 14k 18 ft bumper pull flat bed i put a steel deck on trailer express manufacturer. 3 axel tube, 1/2 x 7 ubolts 1 3/4 wide springs Spring center 25 3 straps 2.5 x 7.5- 8 torsion bone 6 lug rims Was looking at a heavier duty kit to replace my existing like K71-359-00. Will this kit work for 14k ? Can I use 9/16 ubolts ? looking for heavier ubolt to spring plate also,mine are all bent And would like to replace all the wheel studs 1 axel has brakes,are the studs the same for brake/non brake ? Thanks for the help.
asked by: Shannon D
Helpful Expert Reply:
Yes, your 14,000 lb trailer can absolutely use the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs # K71-359-00.
Then as for replacement U-bolts for your 3 inch round axle you can use U-bolts that are 9/16" diameter such as the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts # APUBR-9.
As for the wheel studs, just make sure the measurements of the new wheel studs are the same; I have added a link below to our entire selection of wheel studs for you to check out.
Products Referenced in This Question
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 5200 lbs - 7000 lbs
- Round Axle - 3 Inch
- 9/16 Inch Diameter
- 7-1/16 Inch Long
- Redline
more information >
Product Page this Question was Asked From
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- Double Eye Springs
- Tandem Axle
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Q&A: Recommended Hangers and Shackles for Building Tandem 7,500 Pound Axle Trailer
- Search Results: k71~449~00
- Q&A: Replacement Equalizer, Shackles and Wet Bolts for 20 Foot Trailer with 7-3/4 Inch Wide Equalizer
- Q&A: Heavy Duty Equalizer Kit for 33 inch Axle Spacing Where Equalizers Hit Frame
- Q&A: What Size Zerk Fittings Does Dexter Equalizer Use
- Q&A: Can 5-3/4" Equalizer Replace 7-3/4" Equalizer on 2019 Grand Design Imagine 2250RK
- Q&A: Replacement Trailer Suspension Shackles, Equalizers and Bolts
- Q&A: Hanger Spacing With Equalizer Kit # K71-359-00 with 25-1/4 inch Leaf Springs
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Search Results: leaf spring
- Shop: Trailer Wiring
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Shop: Brake Controller
- Search Results: equalizer
- Article: Trailer Tire Sizing
- Search Results: fender
- Video: Choosing the Right Trailer Wiring
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Suspension Enhancement
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Trailer Suspension Parts
