Could Dexter A-60 Coupler Fit 2005 Four Winds Trailer

Question

Question:

Live Chat no help. I have a 2005 Four Winns trailer which was self manufactured by Four Winns. I can not find original manufacturer of the brake actuator. The inside dimensions of the tongue are 3 1/8 by 4 1/8. will item# DX29FR Dexter .5LA-60 fit inside the tongue? Outside dimension is 31/2 by 4 1/2. Sorry I do not have a photo. Do you have an alternative to fit my trailer? I didnt see anything. Many thanks.

asked by: Thad F

0

Expert Reply:

If you have a coupler actuator that looks like the # DX29FR but it mounts inside the channel on the trailer frame what you would most likely actually want is the inner member of this coupler with the part # DX99FR. This is the inner section of the Dexter actuator which it sounds like you have the outer section welded to your trailer frame.

expert reply by: Jameson C

0

Answer 1

We do have a great option for replacing your Tie Down LP 750 Brake Actuator. The Dexter DX7.5L A-60 Brake Actuator #DX29FR that you mentioned can be used for a lot of different trailer tongue configurations. It can be slid inside a trailer tongue…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

We do have a potential solution for you, but the Replacement Inner Member #DX99FR is not a suitable replacement for the TDE 8000LP. The #DX99FR is made only for Dexter DX7.5L and Legacy UFP actuators. The pins will not line up with a TDE I am sorry…

view full answer...

Answer 4

I recommend using the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX29FR to replace the Titan Aero 7500 you currently have. The top holes are 3" apart on center which should match with what you currently have, but you'll…

view full answer...

Answer 5

The difference is the trailer tongue size the coupler was designed to fit. The part #DX29FR is designed to fit a 3 inch by 4 inch straight tongue whereas the part #DX56FR is designed to fit a 3 inch by 5 inch straight tongue. Aside from that they are…

view full answer...

Answer 6

Yes, the Dexter actuators part #DX29FR and #DX27FR are interchangeable and either could be used in place of the other. The mounting patters are exact same.

view full answer...

Answer 7

Yep, you got it, the bolt hole dimensions are 3" x 2-1/2" for the Dexter DX7.5L A-60 Brake Actuator For Disc Brakes #DX29FR. This fits over a 3" x 4" tongue and the ball to opposite end length you stated does not matter, no.

view full answer...

Answer 8

We can get you a replacement for your TDE LP75 disc brake actuator; that's a 7,500 lb actuator that accepts a 2" hitch ball, and the correct option will depend on if your trailer tongue is 3" wide x 4" tall or 3" wide x…

view full answer...

Answer 9

When it comes to replacing your Master Cylinder assembly The Replacement Master Cylinder Assembly for Dexter Brake Actuators - Disc Brakes #DX44FR is the correct part for you. This master cylinder assembly fits most Dexter disc brake actuators in the…

view full answer...

Answer 10

Appreciate that info, and there is an option for a disc brake actuator that will work for your 3" x 4" tongue and connects to a 2" hitch ball: - Dexter DX7.5L A-60 Brake Actuator w/ Electric Lockout #DX29FR The #DX29FR is designed to…

view full answer...

Answer 11

The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout part #DX29FR for disc brakes and part #DX27FR for drum brakes use 1/2" diameter mounting hardware. We have used both grade 5 and grade 8 bolts when doing installations of them but the…

view full answer...