Replacement 12 mm Bolt for Thule Transporter Cargo Carrier

Question

Question:

Hi I need a ENM12bolt for a Thule Transponder Cargo. Thanks.

asked by: Karen D

0

Expert Reply:

We have one 12 mm bolt that fits the Thule Transporter with the part # 908-1240-54 which I believe is what you are looking for.

expert reply by: Jameson C

0

Answer 1

Actually are Thule Hitching Pro part #TH934XTR is the same as the 934PRO that you also mentioned. This is the current new version of the rack but we decided to keep the old part number.

view full answer...

Answer 2

The 934PRO and #TH934XTR are the same thing so the Thule Snug Tite Hitch Lock and Anti-Rattle Device #THSTL2 would be a compatible anti-rattle hitch pin.

view full answer...

Answer 3

The Thule Hitching Post Pro Bike Rack #TH934XTR that you referenced can fit a Class I 1-1/4 inch trailer hitch but when carried in a Class I hitch you would be limited to only carry 2 bikes on the frame cradles closest to the vehicle. Class I…

view full answer...

Answer 4

Unfortunately all Thule racks require a 1-1/2" as well so what you can do is replace your current hitch with the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item #76128 and alleviate your depth issue. Then you…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 11

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 12

Either the Kuat Tranfer 1 #KU64FR or the RockyMounts MonoRail Solo 1 #RKY10007 would handle the bikes you describe easily. Both would hold the bikes by the tires, so the fact that the rack won't come into contact with the frame will work well…

view full answer...

Replacement 12 mm Bolt for Thule Transporter Cargo Carrier

Product Page this Question was Asked From

Continue Researching