Is Thule Hitching Pro part # TH934XTR Same as 934PRO

Question

Question:

Hello, I am looking to purchase the Thule 934pro. How is this different from the 934XTR you have listed on your website? Thanks.

asked by: Shairali R

0

Expert Reply:

Actually are Thule Hitching Pro part # TH934XTR is the same as the 934PRO that you also mentioned. This is the current new version of the rack but we decided to keep the old part number.

expert reply by: Jameson C

0

Answer 1

We have one 12 mm bolt that fits the Thule Transporter with the part #908-1240-54 which I believe is what you are looking for.

view full answer...

Answer 2

The Thule Hitching Post Pro Bike Rack #TH934XTR that you referenced can fit a Class I 1-1/4 inch trailer hitch but when carried in a Class I hitch you would be limited to only carry 2 bikes on the frame cradles closest to the vehicle. Class I…

view full answer...

Answer 3

Unfortunately all Thule racks require a 1-1/2" as well so what you can do is replace your current hitch with the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item #76128 and alleviate your depth issue.…

view full answer...

Answer 4

The 934PRO and #TH934XTR are the same thing so the Thule Snug Tite Hitch Lock and Anti-Rattle Device #THSTL2 would be a compatible anti-rattle hitch pin.

view full answer...

Answer 5

The Thule Trailway 959, which is essentially the big box store version of the Thule Hitching Post Pro #TH934XTR does not have an option for a quick release from the hitch, it does require the use of the threaded hitch bolt. Your question is very…

view full answer...

Answer 6

Thank you for the picture. It looks like you have the Thule Hitching Post Pro, part #TH934XTR. We have a replacement bolt for that, but the bolt you reference, part #915087031, is not it. The replacement bolt you need comes in the Replacement…

view full answer...

Answer 7

I spoke with my contact at Thule and he said the #THSTL2 will indeed fit with the discontinued Thule Hitching Post Pro 934Pro. I have included a link to a product demonstration video for you to check out as well.

view full answer...

Answer 8

Definitely! The Thule Hitching Post Pro #TH934XTR uses a lot of the basic Thule equipment including the following: Stay-Put Cradle - #853-7887 Anti-Sway Attachment - #852-2903-001 2" Hitch Adapter - #853-7489 Round Tube End Cap - #853-2181…

view full answer...

Answer 9

To replace the factory threaded hitch bolt that comes with the Thule Parkway use the Replacement Hardware #7520990001. This kit will include the hitch bolt and a wrench for installation. If you are looking for added security, Thule offers the Snug…

view full answer...

Answer 10

The Trailway sold in the big box stores is the same thing as the Hitching Post Pro, #TH934XTR, both of which are similar to the Parkway. The straps are all the same too. But the Trailway and Hitching Post are more related to each other since they are…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Is Thule Hitching Pro part # TH934XTR Same as 934PRO

Product Page this Question was Asked From

Continue Researching