Does Thule Hitching Post Pro Bike Rack # TH934XTR Fit Class I Trailer Hitch

Question

Question:

Is this product capable of carrying 4 bikes on a Class 1 hitch, most of the 4 bike carriers have a warning that you can only put 2 bikes on a Class one hitch, but I do not see that information anywhere on the page. Thanks

asked by: Gary

1

Helpful Expert Reply:

The Thule Hitching Post Pro Bike Rack # TH934XTR that you referenced can fit a Class I 1-1/4 inch trailer hitch but when carried in a Class I hitch you would be limited to only carry 2 bikes on the frame cradles closest to the vehicle. Class I hitches are not strong enough for those 3rd and 4th bikes that are farther away from the vehicle.

expert reply by: Jameson C

1

Answer 1

Actually are Thule Hitching Pro part #TH934XTR is the same as the 934PRO that you also mentioned. This is the current new version of the rack but we decided to keep the old part number.

view full answer...

Answer 2

If by tow bar you mean a rear-mounted trailer hitch receiver that can hold a hitch-mount bike rack like the Thule Hitching Post Pro #TH934XTR, then yes, we can absolutely help you. (Please note that the term tow bar, strictly speaking, refers to a…

view full answer...

Answer 3

You came to the right place, I can help you figure out what bike rack will work for your Envoy. Class compatibility really gets hairy when you have the smaller 1-1/4 inch hitches. If you have a Class I typically there are only certain bike racks that…

view full answer...

Answer 4

I called my contact at the manufacturer and this hitch, part #75270, is made in the U.S. in the state of Indiana, and is powder-coated.

view full answer...

Answer 5

Unfortunately all Thule racks require a 1-1/2" as well so what you can do is replace your current hitch with the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item #76128 and alleviate your depth issue. Then you…

view full answer...

Answer 6

The 934PRO and #TH934XTR are the same thing so the Thule Snug Tite Hitch Lock and Anti-Rattle Device #THSTL2 would be a compatible anti-rattle hitch pin.

view full answer...

Answer 7

We have one 12 mm bolt that fits the Thule Transporter with the part #908-1240-54 which I believe is what you are looking for.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Does Thule Hitching Post Pro Bike Rack # TH934XTR Fit Class I Trailer Hitch

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching