Anti-Rattle Hitch Pin For A Thule Hitching Post Pro Bike Rack

Question

Question:

I need anti-rattle bolt for 934 pro. The one I see on your website fits 934 xtr. Do you think the same part would fit 934 pro too?

asked by: Amrik K

0

Expert Reply:

The 934PRO and # TH934XTR are the same thing so the Thule Snug Tite Hitch Lock and Anti-Rattle Device # THSTL2 would be a compatible anti-rattle hitch pin.

expert reply by: Kevin C

0

Answer 1

Actually are Thule Hitching Pro part #TH934XTR is the same as the 934PRO that you also mentioned. This is the current new version of the rack but we decided to keep the old part number.

view full answer...

Answer 2

The Thule Hitching Post Pro Bike Rack #TH934XTR that you referenced can fit a Class I 1-1/4 inch trailer hitch but when carried in a Class I hitch you would be limited to only carry 2 bikes on the frame cradles closest to the vehicle. Class I hitches…

view full answer...

Answer 3

Unfortunately all Thule racks require a 1-1/2" as well so what you can do is replace your current hitch with the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item #76128 and alleviate your depth issue. Then you…

view full answer...

Answer 4

We have one 12 mm bolt that fits the Thule Transporter with the part #908-1240-54 which I believe is what you are looking for.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 7

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 8

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The Tow Defender #RM-4700 you found is really our best option to protect the front of your 2024 Chevrolet Trax. This screen helps to deflect any road debris back down to the ground to keep it traveling under your Trax. This particular cover is…

view full answer...

Anti-Rattle Hitch Pin For A Thule Hitching Post Pro Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching