Does etrailer Hitch # e83ZR Fit 2023 Subaru Forester Wilderness

Question

Question:

Hi. Will your part number e83ZR hitch on a 2023 Subaru Forester Wilderness model. I know this is slightly different from other Forester models. If so, are there any other steps involved for installation? Thanks!

asked by: Rich L

0

Expert Reply:

Yes, the etrailer hitch part # e83ZR is a fit for your 2023 Subaru Forester Wilderness and would not require any additional steps to install.

expert reply by: Jameson C

0

Answer 1

You are correct that the Subaru OEM hitch will sit higher than the Curt #C13409. The OEM hitch will be much more flush with the bumper, while the Curt hitch will sit about 2"-2.5" lower, leaving space between the bumper and the receiver. We…

view full answer...

Answer 2

The heat shield actually has to be permanently removed to install the etrailer Trailer Hitch Receiver #e83ZR on your 2024 Subaru Forester.

view full answer...

Answer 3

Yes, both the Curt Hitch #C13409 and Wiring #C56040 will fit great on your 2023 Subaru Forester Wilderness model. I also recommend picking up the Mounting Brackets #C42CR and #C57202 so your wiring connector is readily available next to your hitch…

view full answer...

Answer 4

There is a couple of roof racks by Rhino Rack that uses similar sized crossbars that will do what you're wanting. You'll want to use the longer 49" crossbar item #RRVA126B-2 that is recommended for the Subaru. The 46" crossbar item…

view full answer...

Answer 5

For your 2023 Subaru Forester, I recommend the etrailer Hitch item #e83ZR. This hitch is custom fit and bolts to your Subaru with included hardware. It is a class III hitch with a 2" receiver. I have linked an installation video below and…

view full answer...

Answer 6

It does! I verified for you that the Curt hitch does indeed fit your 2022 Subaru Forester Wilderness, with the correct part number being the following: - Curt Trailer Hitch Receiver #C13409 I also added a cut out for you of a review of the #C13409 a…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...