Trailer Wiring Harness that Fitts 2015 Mini Countryman

Question

Question:

I have a 2015 mini Cooper countryman And I need to wire it for my kayak trailer. Is this the kit I need for sure ? And it will it hurt my minis electrical system in any way ? Thank you for your time :

asked by: Trina H

0

Expert Reply:

Yes, the Curt trailer wiring harness part # C59236 is a confirmed fit for your 2015 Mini Countryman and would be correct to use for towing a kayak trailer. It would not hurt your electrical system in any way.

expert reply by: Jameson C

0

Answer 1

You could use Curt trailer wiring harness 56146 on your 2011 Mini Cooper if you wanted. But this is the old design. The new design is available in kit #C59236 but the converter part is not available by itself. The new design has proven to be more…

view full answer...

Answer 2

The red wire of the #C59236 would need to run to the stoplight circuit of your vehicle if it has separate turn and brake lights. Or if they are combined on the same circuit it would just get grounded. You may need a circuit tester like the part…

view full answer...

Answer 3

The 5-wires that are ran to your 4-way means that you have a wishbone 4-way. That means that the running light circuit has two wires ran for each side of the trailer. The Curt 4-way part #C58044 would work well with this. The running light circuit of…

view full answer...

Answer 4

The brown wire of the Curt Powered Tail Light Converter #C59236 that you referenced would attach to the running light circuit.

view full answer...

Answer 5

The Curt Powered Tail Light Converter part #C59236 is a universal trailer wiring harness. Therefore, specific year make and model installation instructions are not available. That said, the installs really don't vary much from vehicle to vehicle…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Trailer Wiring Harness that Fitts 2015 Mini Countryman

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching