Which Circuit Does Brown Wire of Curt Powered Tail Light Converter # C59236 Connect To

Question

Question:

Do you know what color wire the Brown wire should the brown wire connect to?

asked by: Sunny Y

0

Expert Reply:

The brown wire of the Curt Powered Tail Light Converter # C59236 that you referenced would attach to the running light circuit.

expert reply by: Jameson C

0

Answer 1

The Curt Powered Tail Light Converter part #C59236 is a universal trailer wiring harness. Therefore, specific year make and model installation instructions are not available. That said, the installs really don't vary much from vehicle to vehicle…

view full answer...

Answer 2

The 5-wires that are ran to your 4-way means that you have a wishbone 4-way. That means that the running light circuit has two wires ran for each side of the trailer. The Curt 4-way part #C58044 would work well with this. The running light circuit of…

view full answer...

Answer 3

Yes, the Curt trailer wiring harness part #C59236 is a confirmed fit for your 2015 Mini Countryman and would be correct to use for towing a kayak trailer. It would not hurt your electrical system in any way.

view full answer...

Answer 4

You could use Curt trailer wiring harness 56146 on your 2011 Mini Cooper if you wanted. But this is the old design. The new design is available in kit #C59236 but the converter part is not available by itself. The new design has proven to be more…

view full answer...

Answer 5

The red wire of the #C59236 would need to run to the stoplight circuit of your vehicle if it has separate turn and brake lights. Or if they are combined on the same circuit it would just get grounded. You may need a circuit tester like the part…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Which Circuit Does Brown Wire of Curt Powered Tail Light Converter # C59236 Connect To

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching