Roof Rack Recommendation for a 2009 Mazda 5 that uses the Factory Fixed Mounting Points

Question

Question:

My 2009 Mazda5 has factory mounting points for a roof rack, which others like Thule and Yakima utilize. Does this Rhino Rack use these points, or do I have to use the clamp on system?

asked by: T M

0

Expert Reply:

I have exactly what you are looking for. You can use the Rhino-Rack Vortex Aero Crossbars # RRVA118B-2 for black or # RRVA118S-2 for silver with the 2500 Series Leg Kit # RRRLKVA, and the Custom DK Clamps and Pads # DK285. This rack uses your fixed mounting points.

I have attached a demonstration video of this roof rack on a similar vehicle to give you an idea on how it installs.

The weight capacity of this rack is 165 pounds. Before loading any cargo on your roof, I recommend checking your owners manual to verify the weight capacity of your vehicles roof. If your roof weight capacity is lower than the weight capacity of the roof rack, then you will want to use that capacity as your weight limit.

expert reply by: John H

0

Answer 1

Rhino Rack offers a reasonably priced Aero-style bar system for the roof of your Crosstrek. Assuming your Crosstrek has the rails that run from front to back along the edge of the roof, you'd need the #RRSX100 roof rack feet and crossbars…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 5

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 10

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 11

The trailer hitch I recommend for a 2023 Hyundai Tucson is the Curt Trailer Hitch Receiver part #C94WR which I confirmed as a fit with Curt for all models, including the Hybrid. This trailer hitch features a bolt-on installation so there is no…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Roof Rack Recommendation for a 2009 Mazda 5 that uses the Factory Fixed Mounting Points

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching