Replacement Fender for a 2022 Arising Industries Cargo Trailer

Question

Question:

I have a 2022 ARising Ind. cargo trailer, the tires are 26" I’m looking for a wheel fender for it, Do you carry this and if so how much? Thank you

asked by: Tammy

0

Expert Reply:

To replace the fender on your 2022 Arising Ind. cargo trailer I recommend the following:

- CE Smith Single Axle Trailer Fender # CE17100ATB

To install this on your trailer you'll need mounting brackets light part # CE26098G-2 as well as mounting hardware you can find at your local hardware or home improvement store to match the material of your trailer.

expert reply by: Jon G

0

Fender on a 2022 ARising Ind. Cargo Trailer
(click to enlarge)

Fender Location on a 2022 ARising Ind. Cargo Trailer
(click to enlarge)

Answer 1

The CE Smith Single Axle Trailer Fender part #CE17100ATB that you referenced has a radiused lip on both sides of the fender. It can still be bolted on though as the fender lip does go flat. It will set flush to the side of your trailer, but the round…

view full answer...

Answer 2

CE Smith Single Axle Trailer Fender #CE17800G does not have pre-drilled holes, so you will have to drill them. You can reuse your original mounting hardware and brackets or you can use the bolt on brackets, #CE26098G-2. These mounting brackets have…

view full answer...

Answer 3

No worries. I have seen fenders in much worse shape. It looks like the best option is going to be the fenders that you have referenced #CE17900G. I know that this fender does not have mounting holes. But that is because they are a universal fit item…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

Thanks for the photo. Honestly 5 inches of clearance from the fender to the top of the tire is fine if that is what you desire. We normally recommend 4 inches to allow for the suspension travel whether with leaf springs or torsion axles to allow…

view full answer...

Answer 7

I went and checked the thickness for the Tandem Axle Trailer Fenders #HP52VR and they are just over 1/16" or a 16 gauge aluminum.

view full answer...

Answer 8

The Lippert 2420801 hub is an 8k hub with an 8 lug bolt pattern so for a replacement you'd just need the part #8-285-10UC3-A.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Replacement Fender for a 2022 Arising Industries Cargo Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching