Can Aluminum Trailer Wheels Be Used On Boat Trailers

Question

Question:

I have a Bayboat trailer I would like to put this on, any concerns putting this rim on a trailer going I to salt water?

asked by: Nathan M

0

Expert Reply:

An aluminum wheel like the # AM25DR is actually the best option for boat trailers. Aluminum is rustproof which makes it ideal for salt water applications. As long as you're looking for a 14" wheel with a 5 on 4-1/2 bolt pattern this is a great choice.

expert reply by: Robin H

0

Answer 1

Unfortunately, we no longer have the exact wheel you are looking for. For a great looking similar wheel, take a look at the Aluminum Jaguar Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2 - Gunmetal Gray #LHSJ211G which has the same…

view full answer...

Answer 2

Although the Dexstar Steel Mini Mod Trailer Wheel #AM20315 has a e-coat primer and black powder coat finish, this is option is much more prone to rust over an aluminum or galvanized rim. The powder coat finish is mainly for common trailer use so it…

view full answer...

Answer 3

The dimensions I could find for a Norcold 1210 fridge are 68.88 T x 37.88 W x 28.75 D. The closest 12v fridge we carry to this size would be the Everchill RV Refrigerator w/ Freezer Drawer #WAY44FR, which is 28-1/2" wide x 72" tall (at…

view full answer...

Answer 4

As long as your hubs are in good condition, a slip-over kit like the Kodiak Disc Brake Kit #K2R35DS that you referenced will work well and be easiest to replace the rotors and calipers. You will want to ensure that the kit matches your hubs. The…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 8

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 9

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 12

The 12 inch tires that we carry are rated for 65 miles per hour. Any faster than that for extended periods and the excessive heat build up will cause tire failure. To get a tire with a higher speed rating you would have to go up in size. That also…

view full answer...