Furrion Backup Camera Compatibility with Voyageur Pre wIre Camper System

Question

Question:

Is the Furrion bracket/plate compatible with the Voyageur prewired set-up on the back of a 2020 Keystone Outjback 280URB travel trailer?

asked by: Dolf

0

Expert Reply:

We have the perfect solution but the Furrion Vision S W is not compatible with the pre wiring from Voyager.

Instead the Voyager WiSight Wireless RV Backup Camera # ASA24YR is the way to go. This will allow you to use the already existing bracket to not only mount your camera but attach it to the existing plug to power it.

expert reply by: Randy B

0

Answer 1

You are just fine; it will work with the prewiring in your 2019 Lance 855. While correct that a 2.0 will not work with a 1.0 system this is making reference to intermixing the cameras and monitors. The prewire plate on the back of the trailer is…

view full answer...

Answer 2

If you're prewired for Furrion then there will be a connector already there for the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 5" Screen #FCE48TASL-05 to plug into. If you don't have…

view full answer...

Answer 3

The MORryde StepAbove RV Steps #MR68RR would actually need to be folded up in order to get to the pins in the hinge to remove it so you would have more than enough room within that 32" of space to pull the pins and remove the steps. I've…

view full answer...

Answer 4

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

view full answer...

Answer 5

Yes, you can connect the camera from the Voyager WiSight 2.0 Wireless Backup Camera System #ASA37YR to a constant 12V power wire so it isn't tied to the running light circuit of your setup. You can either find a pre-existing circuit or run your…

view full answer...

Answer 6

It is certainly possible for the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY58GR to work on your 2020 Ford F-250 Super Duty short bed, but there are likely going to be clearance issues as these are meant for long bed trucks. That…

view full answer...

Answer 7

Your 2020 Winnebago Minnie is pre-wired for a Voyager Camera System and I specifically recommend the Voyager WiSight Wireless RV Backup Camera #ASA37YR.

view full answer...

Answer 8

The B&W Continuum Weight Distribution System part #BW78FR won't allow for the tailgate to open fully as it ships. In order for this to happen you'd need to switch out the shank for a longer option which is still currently being developed…

view full answer...

Answer 9

For your 2021 Winnebago Voyage Travel Trailer I recommend the Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision, #ASA37YR as it is designed for RVs with factory installed Voyager WiSight technology such as newer model Winnebago's…

view full answer...

Answer 10

Currently the Furrion Monitor Power Cable #C-FOS07TAPK-006 is the only available power cable for the Furrion Vision S Wireless RV Backup Camera System #FOS05TASF. There are AC to DC Adapters like #PP01 that you can use to plug the included power…

view full answer...

Answer 11

As installed, the camera system can either be wired to activate with the reverse lamps by tying the power wire into that circuit, or into the running lamps so that the system turns on with the running lamps or headlights. This is normal. If you want…

view full answer...

Answer 12

When you want to pair the monitor of the Furrion Vision RV system part #FOS05TASF to another camera go to the menu on the monitor. First select "pairing" then select "rear cam". The system will then search for that camera and show…

view full answer...

Furrion Backup Camera Compatibility with Voyageur Pre wIre Camper System

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching