TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers
(15 reviews)
Price: $803.04
In Stock
TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers
Item # TLC1204
Retail:$899.99
Our Price: $803.04
You Save: $96.95
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (15)
- Q & A (0)
- Photos
TorkLift Trailer Hitch - TLC1204
- Class V
- 2 Inch Hitch
- 17000 lbs GTW
- Visible Cross Tube
- TorkLift
- 1700 lbs TW
- 20000 lbs WD GTW
- 2000 lbs WD TW
- Custom Fit Hitch
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty, dual-receiver hitch. Specially designed for the truck camper market, the SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.
Features:
- Heavy-duty hitch lets you tow hefty loads, even when using a hitch extension (sold separately)
- Specially designed to maintain high capacity when used with TorkLift accessories
- Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time
- Compatible with industry-standard ball mounts and hitch accessories
- Truck-camper-friendly TorkLift design
- Pre-drilled to accept TorkLift camper tie-downs (sold separately)
- SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper
- Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability
- Hardened, reinforced hitch pin holes prevent elongation from wear
- Bolt-on installation - no welding required
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish resists corrosion
- Safety chain loops are built in
- 2 Hitch pins and clips included - hitch locks sold separately
- Custom fit for your vehicle
- Made in the USA
Specs:
- Receiver openings: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 17,000 lbs
- Maximum GTW when used with weight distribution: 20,000 lbs
- Maximum tongue weight: 1,700 lbs
- Maximum TW when used with weight distribution: 2,000 lbs
- Maximum gross trailer weight: 17,000 lbs
- Cross tube dimensions: 3-1/2" x 3-1/2"
- Lifetime warranty
With the SuperHitch Original's 2 receivers, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time. And if you have a truck bed camper, this hitch has pre-drilled mounting points for TorkLift's super-sturdy camper tie-towns (sold separately). You can also add one of TorkLift's SuperTruss hitch extensions (sold separately) to extend the top receiver of the SuperHitch so that it clears your camper, allowing you to tow your trailer while your camper's installed.
Truck Bed Camper Compatibility
TorkLift is known for their truck camper tie-down systems and other camper accessories, so it just makes sense that they would have camper enthusiasts in mind when designing a trailer hitch. Each SuperHitch is built with integrated mounting points for TorkLift camper tie-downs, making it easier than ever to get a quality tie-down system for your slide-in camper.
The dual-receiver design of the SuperHitch also makes it easy to tow with your truck bed camper in place. The SuperTruss line of high-capacity hitch extenders is specially designed to extend the hitch receiver back far enough to clear your bed-mounted camper, while still allowing for an excellent towing capacity. An ordinary hitch extender can dramatically reduce your towing capacity. But each SuperTruss extension forms such a solid connection with the SuperHitch that the setup is able to maintain one of the highest weight capacities in the industry. When used with a standard weight distribution system, the setup can maintain up to a 10,000-lb weight limit, even with an extension that is 60" long. As a result, you can clear almost any truck bed camper and still do some heavy-duty towing.
Dual Receivers for Maximum Versatility
With the SuperHitch from TorkLift, you can tow your trailer and use a hitch-mounted bike rack or cargo carrier at the same time. This is thanks to the dual-receiver design of the SuperHitch.
Most trailer hitches have a single receiver. Typically, you can find an adapter or extension piece that will slide into your hitch to give you 2 receivers, but these adapters dramatically reduce both your towing capacity and your tongue weight, limiting how much you can tow, as well as how much you can carry with a bike rack or cargo carrier. Each SuperHitch is specially constructed to maintain a high weight capacity so that you can use the 2 receivers without sacrificing towing or carrying ability.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff is available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it, and we've towed with it, so whatever your question, we can answer it.
C1204 Tork Lift Original Super Hitch with 2 Receivers
This Product Fits The Following Vehicles
- 2001 - 2006 GMC Sierra 2500 HD - 6-1/2 Foot Bed
- 2007 - 2007 GMC Sierra Classic 2500 HD - 6-1/2 Foot Bed
- 2001 - 2006 Chevrolet Silverado 2500 HD - 6-1/2 Foot Bed
- 2007 - 2007 Chevrolet Silverado Classic 2500 HD - 6-1/2 Foot Bed
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers - TLC1204
Average Customer Rating: 4.7 out of 5 stars (15 Customer Reviews)
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty, dual-receiver hitch. Specially designed for the truck camper market, the SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.by: Robin F.05/11/2020
Worked better than expected. I have a 2004 GMC 2500HD shortbed with a 2018 Northern Lite 8.11 EX slide in truck camper. The camper extends 4' past the rear bumper. I pull a two 12' trailer behind the truck. the super hitch with the 48" extension works perfect.
by: Fergie12/10/2019
I'm very happy with this hitch, Everything needed to install was included and the installation instructions were accurate and easy to follow.
I tow a flatbed trailer with my Jeep on it and it is very stable.
by: Mark 09/27/2019
2007 Chevrolet Silverado
Very happy with the Torklift TLC1204. Fit my 2007, Silverado CLASSIC, 2500HD, Extended Cab, SHORT BED perfectly. Easy bolt on installation, no drilling required.
Each of the two receivers offers a snugger fit than the stock hitch - no more rattling, particularly with a supertruss extension which is rock solid.
Etrailer.com order and delivery was seamless and the hitch was delivered on time to Central CA residence in approximately 5 working days. THANK YOU!
by: Jake09/27/2021
2005 GMC Sierra
If I had to buy this exact set up again, I wouldn't. My factory size tire on my 2005 GMC sierra 2500 HD 4x4 crew cab is 245/75/16... I've upgraded to a 285/75/16 along with matching spare and this spare fits under the truck in the factory spot with my existing Curt XD hitch. It wont fit with this Torklift super hitch. Not even close. I might be able to squeeze a 265 in there now(maybe). Another thing that wont fit well is My $xxx Bullet proof 22K hitch or my $xxx Curt 20K hitch..They only work in the shallow hole in the neck..I cant push it deeper to the 2nd hole in the neck because super hitch puts a solid plate behind the receiver tube. So, you cant slide your hitch in deep enough to put the pin in the 2nd hole.. So there's that. Also, the 7 lines on instructions to install this hitch are horrible(line 5 to be exact). Not even 1 exploded diagram on the steel plate washers to bolts to lock washer to flat washer to nut or whatever..just figure it out and bolt it on. It also hangs low and doesn't snug up to the bottom of the bumper..big ol ugly gap now..So, What's good about it..? Alot actually. The Install is super easy once you figure it all out(time consuming). The packaging is superb, I thought the parts would be blown all over the delivery truck, warehouse and missing parts galore..there were just a few holes in the boxes but it all made it here..every part! This super hitch and true frame mounted camper tie downs are built to the hilt..I mean they're pretty Darn stout. The camper ties down front and rear leave no doubt my truck camper is going to be secure. I give them that. If I had to do it again? I'd buy the front C2205-C2205 tie downs and the rear after market hitch set up and drill or weld on brackets myself. I thought I'd buy my way out of this with an entire bolt on system so I don't have to fab weld or whatever but that bit me in the you know what..If your running a completely bone stock/plain jane/papa truck then get the whole set up. If you have a 4" or 5" exhaust on your diesel and slightly oversized tires, piece it together and save yourself the headache I'm dealing with..IE: possible new tires..cutting down my hitches, modding my exhaust( it did say I may have to do that) etc. I can add photos later if I can go back an edit this review. This hitch can be improved, snug up to the bumper, move the hitch further out to allow for a bigger spare, remove plate behind receiver tubes to allow for modern hitches with adjustable pin holes to slide in deeper. Maybe better diagrams for install? [online] video of the hitch install for this model truck? IDK. Just a suggestion.
by: Dan 05/04/2020
2003 Ram 2500
Purchased the superhitch to install on chevy 2500 hd Duramax truck so I could pull double axle trailer with utv and camping gear while my 8' popup camper was on my short bed truck. Installation went well as I did it myself using the one person instructions. Instructions could have a few more pictures to make it easier for non mechanical people.. I will be pulling with torklift 21" extension truss.. All parts were included and in very good shape. Thanks to etrailer for the quick shipping and also we answering a couple question prior to purchase in a timely mannor.
by: Sam11/26/2014
2005 Chevrolet Silverado
I would have given your product the Excellent, but I felt that I needed more of the steel stock parts that are a couple inches long with the hole in the middle. I have it installed as so with the 32 inch reach that I purchased from you earlier. I think that I am going to like it very much. Now I have peace of mind when I have my Lance camper on with my Classic Car in the 20 foot inclosed trailer. I will be testing it after March 2015 when I take all back to Tenn. I like your quick response to responding to my emails. It is kinda late and dark out right now, but I will take pictures and send another response tomorrow.
by: Doug 02/19/2023
Best and strong will never use anything else great product
by: Cindy03/17/2017
2005 Chevrolet Silverado 2500
Fast shipping. Best price we found for this product. Easy installation on 2005 chevy 2500. Only problem we had is oversized spare tire would not fit after installation (tire was a 285/75/16).
by: Mike 07/29/2021
Installed it today , everything was included pretty straight forward.Packaging was good, all parts were accounted for.Everything fit.
by: Mark Brodesser02/06/2015
2005 GMC Sierra
Excellent products, superior customer service from Wayne and everyone at etrailer.
by: Jonathan 09/06/2022
Great customer service!
by: Richard 09/07/2022
by: Paul11/28/2020
by: Allan08/27/2020
2004 Chevrolet Silverado
15
15
See what our Experts say about this TorkLift Trailer Hitch
- Dual-Receiver Hitch for 2004 GMC Sierra 2500 with 6-1/2-Foot BedFor your 2004 GMC Sierra 2500 with 6-1/2-foot bed we do have a dual-receiver hitch option from TorkLift, part # TLC1204, which has two 2-inch receiver openings. This allows use of a hitch-mount carrier, such as a bike rack, while towing. The Sierra's factory hitch needs to be removed to install the TorkLift. TorkLift makes the only dual hitch we currently offer for your truck and as you noted it features excellent build quality including reinforced pin holes. Another option is to install...
view full answer... - Multipurpose 2-Inch Ball Mount to Allow Both Trailer Towing and Hitch-Mount Accessory UseFor your Mercedes-Benz Sprinter-based RV we do not offer an actual trailer hitch receiver with dual openings, such as # TLC1204 from TorkLift. For the 2018 Sprinter 3500 chassis, as an example, we do offer single receiver hitches shown on the linked page. Their fits vary depending on wheelbase and bumper type. We DO have hitch adapters like Roadmaster # RM-077-6 that allows both flat towing with a tow bar and towing with a tow dolly while using a hitch-mount accessory like a bike rack...
view full answer... - Tork Lift Trailer Hitch Recommendation for a 2005 GMC Sierra 2500 with 6-1/2 Foot BedThe only TorkLift trailer hitch that fits your 2005 GMC Sierra 2500 short bed is # TLC1204. This is the SuperHitch Original Class V hitch with dual 2 inch receivers. It is rated for 1,700 pounds tongue weight and 17,000 pounds gross trailer weight. When used with weight distribution it is rated for 2,000/20,000 pounds. I have linked a video of this bad boy for you.
view full answer... - Recommended Hitch Extender For My 2006 Silverado 2500 HDWhen it comes to add a hitch extender on your 2006 Chevrolet Silverado 2500 HD with a 6-1/2 foot bed first you will need to install The TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2 inch Receivers # TLC1204. This hitch has a bolt on installation with no welding required and has a black powder coat finish that resists corrosion. This hitch has a maximum gross trailer weight up to 17,000 pounds and has a maximum tongue weight up to 1,700 pounds. I would...
view full answer... - Recommended Trailer Hitch With Extension For 2003 Chevrolet Silverado With CamperThe only way you can get the extension you need for a trailer hitch is by replacing your trailer hitch with the TorkLift SuperHitch Original Trailer Hitch, part # TLC1205. This is a Class V hitch and it has dual 2-inch receiver openings. You can then use the TorkLift SuperTruss Hitch Extension, part # TLE1548. This extension has dual shanks that fit in the dual receivers. Since your truck comes with a 7-way you can easily replace it with part # 30955. This will give you a working 7-way...
view full answer... - Recommended Hitch Extender for a 3 Inch Hitch Receiver You don't need to change out your hitch. Since your 2020 Ford F-350 has the 3" receiver you can use the 36" TorkLift Cannon Hitch Extension item # TLE1636. This extension was designed specifically for the 3" receivers that come on the newer Ford trucks. I recommend using the TorkLift Wiring Harness Extension for 36" item # TLW6036. It's an extension cord for your 7-way connector. It makes hooking up to your trailer easier.
view full answer... - Longest Available 2 Inch Trailer Hitch Extender The longest trailer hitch extender we offer is the TorkLift SuperTruss Hitch Extension part # TLE1560 which measures 60". However, the SuperTruss will require you to use a SuperHitch like part # TLC1204. The longest trailer hitch extender we offer for a 2" trailer hitch that does not require the SuperHitch is indeed 18" like part # C45796. Please note that a hitch extender minus the SuperTruss will reduce your tongue weight capacity by 50%. I have attached a list of all the 2" trailer...
view full answer... - Recommended Hitch Extender to Clear Truck Camper on 2016 Ram 2500The dual tube TorkLift extenders that you mentioned do offer a longer extension but they are designed specifically for dual receiver trailer hitches from TorkLift like # TLC1204. Unfortunately there is not one currently available for your 2016 Ram 2500 so your only option will be with a standard single tube extender. The longest standard extender we have available is an 18 inch long unit like the Curt # C45796. This inserts into a 2 inch receiver like what you already have on your truck...
view full answer... - Recommended Weight Distribution System or Extended Ball Mount for Clearing a Tail Gate Yeah, there are no TorkLift SuperHitches available for a 2023 Jeep Gladiator or any Jeep. Those are the heaviest duty bumper pull hitches and are reserved for large trucks with the highest towing capacities. You'll want to look into a weight distribution system with an extended shank if your Gladiator's hitch is rated for one. If you have a hitch that mounts underneath your frame like the Curt item # C74DR you can use a weight distribution system. For a 550 lbs tongue weight, I recommend...
view full answer... - Heavy Duty 17k Capacity Torklift Hitch for 2002 Chevy Silverado 2500HDYes, the Torklift Class V hitch part # TLC1205 would be a great option for your 2002 Chevy Silverado 2500HD long bed. If you instead had a short bed truck you would want the part # TLC1204. The 17k capacity is more than what your truck is rated for so it would be more than adequate.
view full answer... - Hitch Extender for a 2007 Chevy Silverado 2500HD Short Bed Towing a Horse TrailerWhen you use a hitch extension in a 2 inch or 1-1/4 inch receiver it will reduce the tongue weight capacity of the hitch by 50 percent. But if you have a 2-1/2 inch receiver the tongue weight capacity is not reduced but usually the capacity of he extension is lower than the hitch so you would go by the lower rating. If you have a 2-1/2 inch receiver opening you can use the Titan extender # RP45292 at the 24 inch length. That will give you a capacity of 6,000 pounds; 8,000 when using weight...
view full answer... - Torklift SuperHitch that Fits 2003 Chevy Silverado with 21 inch Hitch ExtenderThe Torklift SuperHitch part # TLC1204 is the correct fit for your 2003 Chevy Silverado 2500HD short bed. And then the correct 21 inch Torklift hitch extender is the part # TLE1521 and you'd be set! As long as you are under the weight capacities of the truck and towing components you'd have no negative affects while towing.
view full answer... - TorkLift SuperHitch Trailer Hitch Receiver For a 2002 GMC Sierra 2500HD with 6-1/2' BedThe TorkLift SuperHitch Original Trailer Hitch Receiver # TLC1204 is currently the only receiver available from TorkLift for your 2022 GMC Sierra 2500HD with the 6-1/2' bed. I spoke with a rep at TorkLift and they explained that the Magnum receiver C1204-30 you are looking for was discontinued in 2016. The reason for this was the receiver is rated for more than your Truck can handle and everyone was getting the Receiver # TLC1204 as it was more price conscious. The TorkLift SuperHitch...
view full answer... - Needing a Heavy Duty Rated Trailer Receiver Hitch to Fit a 2007 Chevrolet Silverado 2500 HD ClassicOn your 2007 Chevrolet Silverado Classic 2500HD truck, we have couple of heavy-duty Class V trailer hitches that I recommend. The Draw-Tite Class V Hitch, # DT45517, is a class V hitch with the 2-1/2 inch receiver opening. This hitch has a Gross Towing Weight of 13,000lbs w/o Weight Distribution and 17,000 lbs with WD. Also the tongue weight rating is 1,300 lbs w/o WD and 1,700 lbs with WD. This hitch is custom-fit to bolt on to the frame of your Chevy with no drilling or welding required....
view full answer... - Recommended Trailer Hitch With Extension For 2007 Chevrolet Silverado With Camper InstalledI recommend the TorkLift SuperHitch Original Trailer Hitch Receiver, part # TLC1205 for your Silverado if you have an 8-ft bed on your truck. If you have a 6-1/2 ft bed the hitch I recommend is part # TLC1204. As far as the extension you will need to measure the distance from the hitch pin hole to the end of the camper to see what length extension you will need. We offer different length extensions like part # TLE1524 for a 24 inch extension. For a 32 inch extension I recommend part...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John F.
12/11/2020
Awesome, great product. I have a 04 Chevy 2500 HD. With my camper on I put my Jeep on a 7000 pound car hauler trailer attached to the Torklift thru a Supertruss extension. The whole package works great. Installation was very easy with basic tools and a floor jack, no drilling required. Very nice product