Which Wedge to Use with Pullrite Hitch and Lippert Turning Point Pin Box

Question

Question:

I have a lippert turning point king pin and a pullrite isr series hitch. Is this the correct wedge? The one i currently have doesn’t seem right

asked by: Jerad

0

Expert Reply:

Yes, the Reese wedge part # RP99FR is the correct wedge to use with ta Lippert Turning Point pin box and a Pullrite ISR fifth wheel hitch.

expert reply by: Jameson C

0

Answer 1

The 5th Airborne Custom Wedge #SWW-03 is designed for select Draw-Tite hitches and is meant to work with the Sidewinder and 5th Airborne Sidewinder. Instead, the MORryde Orbital Pin Box Wedge for PullRite SuperGlide Hitch #MR65TR will work with…

view full answer...

Answer 2

The Demco #DM6140 will work with your B&W 1307 Turnoverball gooseneck hitch as is. The B&W gooseneck hitch uses a square hole for the ball, so you will just remove the ball, and the Demco #DM6140 will go directly into the square hole. That…

view full answer...

Answer 3

If your Pull Rite hitch is the ISR (industry standard rail compatible hitch), then yes the Curt X5 #16310 that you referenced would work well with your hitch. The mounting slots for the tabs on the 5th wheel measure 22 inches front to back on center.…

view full answer...

Answer 4

Curt states that bed mats can affect the fit of the X5 #16310. Basically if the Curt X5 can be pinned in like normal then it can be used with a bed mat. If it cannot then you would need to trim the mat in the shape of the X5 in order to get it to pin…

view full answer...

Answer 5

When installed, the curt X5 #C16220 Base Raiil Adapter plate provides industry standard 5th wheel mounting rails, which are compatible with Reese, Curt, Draw-Tite, Husky, Valley, Demco and B&W hitches, among others. This adapter plate would work…

view full answer...

Answer 6

Let's start with the adapter you need for the Curt EZr Double Lock Underbed Gooseneck Trailer Hitch #C611-624 in your 2019 GMC Sierra 2500 short bed, which is the Curt X5 5th-Wheel Base Rail Adapter Plate for EZr Double Lock Gooseneck Trailer…

view full answer...

Answer 7

The 16K-rated Pro Series #PS30855 and the Reese #RP30047 both feature a 4-way pivoting head assembly to simplify hitching your trailer on uneven ground as well as a dual-jaw system for better grip on your king pin. The key difference between the two…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Which Wedge to Use with Pullrite Hitch and Lippert Turning Point Pin Box

Product Page this Question was Asked From

Continue Researching