Fit of Curt C16220 X5 Base Rail Adapter Plate with Husky Ez Roller 5th Wheel Hitch  

The Demco #DM6140 will work with your B&W 1307 Turnoverball gooseneck hitch as is. The B&W gooseneck hitch uses a square hole for the ball, so you will just remove the ball, and the Demco #DM6140 will go directly into the square hole. That…

I spoke with my contact at CURT about the X5, #16310. He could not confirm a fit for the Pullrite Superglide 5th wheel hitch as they have not been tested together. However, he did provide me with the mounting tab spacing for you to compare to your…

Easiest way to tell which gooseneck hitch you have is by looking at the safety cable loops. If they are about as wide as the gooseneck ball hole and are centered with the ball hole it's an EZr, if the safety chain loops are a smaller and offset…

The bed rails used on the Curt X5 Fifth Wheel Adapter are indeed compatible with Reese standard and sliding hitches. This particular adapter is only compatible with B&W Turnover Ball Gooseneck Hitches using a square shank. I have linked you to…

Curt states that bed mats can affect the fit of the X5 #16310. Basically if the Curt X5 can be pinned in like normal then it can be used with a bed mat. If it cannot then you would need to trim the mat in the shape of the X5 in order to get it to pin…

The Curt X5 Fifth Wheel Adapter for B and W Square Shank Turnover Ball Hitches, #16310, is designed for use with B and W square shank turnover ball hitches. We spoke with Curt and they stated the Pullrite 5th wheel hitch is not compatible with the…

The difference between manual and automatic sliding 5th wheel hitches is that with a manual sliding hitch you simply move the hitch body forward or backwards before maneuvering to give yourself more clearance. Automatic sliders use a rotating head or…

If your Pull Rite hitch is the ISR (industry standard rail compatible hitch), then yes the Curt X5 #16310 that you referenced would work well with your hitch. The mounting slots for the tabs on the 5th wheel measure 22 inches front to back on center.…

Yes, the Reese wedge part #RP99FR is the correct wedge to use with ta Lippert Turning Point pin box and a Pullrite ISR fifth wheel hitch.

The 5th Airborne Custom Wedge #SWW-03 is designed for select Draw-Tite hitches and is meant to work with the Sidewinder and 5th Airborne Sidewinder. Instead, the MORryde Orbital Pin Box Wedge for PullRite SuperGlide Hitch #MR65TR will work with…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…